CPM/CPF Heated compression Bio epoxy (FAST! version)

25.0080.00

Performance Epoxy derived partially from recycled natural oils (up to 50%).

best to be used at 60 degree C or above.

Low smell, low toxicity! Great to work with and more environmental!

http://www.entropyresins.eu/product/super-sap-cpm-cpf-cpl

PS: At the moment we do not stock 15L and 30L options, but we can source them directly from Entropy Europe.

If any chrystals are present in the Resin, please make a warm water bath (40C+ should do, in production the resin is heated to 100 degrees so no worries) and place the Resin container in the warm water and stir til chrystals are gone. This is normal for some Resins. Let it cool down before use!

Clear
SKU: N/A Category:

Description

Compression heat molding: Ski, Snowboard, Wakeboard, Skateboard, Wood laminates

Mix: 100:43

18 min pot life

18-20 min cure time at 80 degree C.

 

PS: At the moment we do not stock 15L and 30L options, but we can source them directly from Entropy Europe.

Tip 1: Mix a pot of 200-300mL of epoxy at the time. Dont mix much more then this. Stir well for 2min with your hand, scrape the edges. The mix can become a bit hot, this is normal. Let it sit for 1-2 minutes for air to escape!

Tip 2: make sure you are protected with gloves as skin contact it the worst exposure.