Shop

Showing 25–48 of 92 results

  • Baltic Birch veneer

    Sale! 3.95 "incl. VAT"
    Select options

    Baltic Birch veneer

    Finest grade Baltic Birch veneer for skateboard and longboard decks. 1.5mm thick.

    Local wood as durable as Maple veneer! Birch veneer is not less durable them Maple, this is just a hype. Use local!

    Works well with our Epoxy resin.

    Make sure when you make your ride, to seal the edges with epoxy/varnish (wood glue does not always works as well) to prevent water intrusion. This will make your ride last.

     

    Quantity prices (excl. VAT):

    50+ : 3.75 euro/pcs

    100+: 3.55 euro/pcs

    200+: 3.35 euro/pcs.

    please contact us for order.

    SKU: 100 Category:
    3.95 "incl. VAT"
  • All-round Race base BLACK 1.2mm (NHS R)

    21.5023.50 "incl. VAT"
    Select options

    All-round Race base BLACK 1.2mm (NHS R)

    This is new series IS NHS R3428 race base from Isosport, highest quality all-round race (ptex) base.

    IS NHS R3428 1.2/300-330mm

    Sintered ski- and snowboard running surfaces made of UHMW polyethylene modified with special fluor and additives for better gliding at a wide range of conditions.

    Width is 330mm and thickness is 1.2mm.

    price is pr. meter.

    Sanded and flamed on both sides.

    before cutting, lay the base on a flat table for about 48h the base will start to relax. The heating tunnel is just a fast way to bring out the tension.

    Storage: Room temperature with low temperature fluctuations. Humidity should not be too high. You can store it on the roll. If you recognize some wraping you can also try to wind it in other direction for storage.

    SKU: N/A Category:
    21.5023.50 "incl. VAT"
  • 1.2/330mm Ptex Sintered base WHITE (IS 7200)

    16.25 "incl. VAT"
    Add to cart

    1.2/330mm Ptex Sintered base WHITE (IS 7200)

    Sintered Base for skis and snowboard UHMW PE base ptex.

    Suitable for sublimation.

    This is some of the highest quality and toughest fast sintered ptex base, UHMW.

    IS 7200 isospeed WHITE.

    Width is 330mm and thickness is 1.2mm. Price pr.m.

    1m price, for orders of more then 1m, a single piece is supplied

    Base is sanded and flamed on both sides for best binding properties.

    16.25 "incl. VAT"
  • Poplar/Beech Snowboard wood core 1700x320x9mm

    28.50 "incl. VAT"
    Add to cart

    Poplar/Beech Snowboard wood core 1700x320x9mm

    Poplar/Beech stringers Snowboard wood core

    Great wood core from Slovenia for snowboards. Poplar wood core with Beech stringers end to end thru the insert area.

    Poplar wood core with Beech stringers in the insert area (2pcs)

    1700 x 320 x 9mm

    single piece wood planks!

    laminated of 25mm wide strips.

    price is pr. piece.

    Category:
    28.50 "incl. VAT"
  • Sintered BLACK uhmw base (100% RECYCLED) (IS 7115X)

    16.0023.00 "incl. VAT"
    Select options

    Sintered BLACK uhmw base (100% RECYCLED) (IS 7115X)

    Ptex, P-tex base or UHMW PE base for skis and snowboard.

    IS CB 7115X sintered base, in black.

    100% made of recycled ptex and therefor naturally friendly alternative to other bases!

    Top quality base in terms of gliding and durability. With added carbon.

    1m price, for orders of more then 1m, a single piece is supplied

    Gliding ability is in generally on top level.

    Sanded and flamed on both sides.

    For more info, see below!

    16.0023.00 "incl. VAT"
  • Glass Fabric – Tri-axial (750gms/26oz – 625mm wide)

    9.50 "incl. VAT"
    Add to cart

    Glass Fabric – Tri-axial (750gms/26oz – 625mm wide)

    Ski, snowboard and kiteboard Triaxial glass fabric.

    Hi-performance woven glass fabric.

    26oz or 750g/m2.

    thickness: 0.6mm

    Width available is about 625mm

    0/+/-45 degree

    0 ply: 283g/m2

    +/-45 ply: 236g/m2

    Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

     

    Category:
    9.50 "incl. VAT"
  • 2.5mm ABS Filler YELLOW 330mm wide (pr.10cm)

    2.65 "incl. VAT"
    Add to cart

    2.5mm ABS Filler YELLOW 330mm wide (pr.10cm)

    price pr 10cm. Maximum length is 152cm

    Bright Yellow ABS tip/tail fill.

    Modified thermoplastic Isosport ABS insert or filler material for tip or tail.

    330mm wide, 2.5mm thick.

    Sanded and flamed, ready for use.

    If more ordered then it is delivered in one piece!

    2.65 "incl. VAT"
  • Extruded base Fluorescent ORANGE 1.2/300mm (IS 4400)

    12.00 "incl. VAT"
    Add to cart

    Extruded base Fluorescent ORANGE 1.2/300mm (IS 4400)

    Isosport extruded 4800 quality base for ski and snowbaord.

    Fluorescent Orange, slightly see thru.

    Color P 804 C

    1.2mm thick

    300mm wide

    Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

    sanded and flamed on one both sides!  ( to give the best adhesion with epoxy)

    12.00 "incl. VAT"
  • Carbon / GRAPHITE sintered base (NHS Graphite)

    19.0021.00 "incl. VAT"
    Select options

    Carbon / GRAPHITE sintered base (NHS Graphite)

    IS NHS GRAPHITE sintered base, top quality base in terms of gliding and durability!

    IS NHS GRAPHITE 2G2GV Black

    Snaded and flamed on both sides.

    1m price, for orders of more then 1m, a single piece is supplied

    high carbon content and depending on the base special carbon types included. This carbon types and quantity makes the base better to grind in process and less greying over time. Making this base very durable and very long lasting.

    Gliding ability is in generally on top level, similar to IS 7500 or better.

    Sanded and flamed on both sides.

    before cutting, lay the base on a flat table for about 48h the base will start to relax. The heating tunnel is just a fast way to bring out the tension.

    Storage: Room temperature with low temperature fluctuations. Humidity should not be too high. You can store it on the roll. If you recognize some wraping you can also try to wind it in other direction for storage.

     

    SKU: N/A Category:
    19.0021.00 "incl. VAT"
  • Poplar/Beech Ski wood core 1900x160x13mm

    24.50 "incl. VAT"
    Add to cart

    Poplar/Beech Ski wood core 1900x160x13mm

    Poplar/Beech stringers Ski wood core

    Popular choice for most skis!

    1900 x 160 x 13

    single piece wood planks!

    price for 1 wood core!

    Poplar wood core with Beech stringers in the screw area.

    Category:
    24.50 "incl. VAT"
  • Magnetic tape for insert 10x620mm

    2.00 "incl. VAT"
    Add to cart

    Magnetic tape for insert 10x620mm

    NEW thinner tape!

    This is a quality magnetic tape for use with our M6 inserts.

    You can cut it in small pieces and attache it to the ‘hat’ or top of the inserts. This will help you find your insert during drilling. It is very helfull if your inserts are not visable due to carbon, graphics or similar.

    0.5mm thick.

    Price is pr. piece 10x620mm

     

    2.00 "incl. VAT"
  • 1.0/330 or 1.2/320mm Sintered Ptex base YELLOW

    15.0016.25 "incl. VAT"
    Select options

    1.0/330 or 1.2/320mm Sintered Ptex base YELLOW

    Sintered Base for skis and snowboard UHMW PE base ptex.

    IS 7200 115 GELB W 2G2GV 1,20/330

    Color Yellow, P 109 C

    Sintered quality base 1.0 or 1.2 thick 330mm wide.

    Suitable for sublimation.

    sanded and flamed both sides. Please check adhesion for this base first or reflame.

    1m price, for orders of more then 1m, a single piece is supplied

     

    SKU: N/A Category:
    15.0016.25 "incl. VAT"
  • 1.2/320mm Sintered base PINK/PURPLE (IS 7200)

    16.25 "incl. VAT"
    Add to cart

    1.2/320mm Sintered base PINK/PURPLE (IS 7200)

    Sintered Base for skis and snowboard UHMW PE base ptex.

    IS 7200 305 PINK 2G2GV 1,20/320

    Color P 674 C

    Sanded and flamed on both sides. Please check adhesion for this base first or reflame.

    1m price, for orders of more then 1m, a single piece is supplied

     

    16.25 "incl. VAT"
  • Ash Ski wood core 1900x155x12.5mm

    30.50 "incl. VAT"
    Add to cart

    Ash Ski wood core 1900x155x12.5mm

    Ash Ski wood core

    Fantastic looks and performance from Ash wood cores made of european Ash wood, with single pieces wood from top to bottom. Ash is great wood for skis and a benefit also is that it is resistant to water, so you can make your skis without using any additional sidewalls.

    dimensions: 1900x155x12,5mm

    single piece wood planks!

    For a Snowboard you need 2 cores, and just join them with the epoxy resin or wood glue.

    Density about 700kg/m3, Y modulus about 13000

    PS: We do not ship any ski or snowboard wood cores together with kite or wake cores. The size is too big for transport.

    Category:
    30.50 "incl. VAT"
  • 1.2/320mm Ptex Sintered Base GREEN (darker)

    16.25 "incl. VAT"
    Add to cart

    1.2/320mm Ptex Sintered Base GREEN (darker)

    ski and snowboard ptex base uhmw pe material.

    IS 7200 621 GRÜN 2G2GV 1,20/320

    sanded and flamed both sides

    IS 7200 Isosport, sintered quality base. Base for ski and snowboard.

    Color: P 362 C

    Width is 320mm and thickness is 1.2mm

    1m price, for orders of more then 1m, a single piece is supplied

    16.25 "incl. VAT"
  • Bcomp flax fabric – Unidirectional (150gms)

    7.5019.50 "incl. VAT"
    Select options

    Bcomp flax fabric – Unidirectional (150gms)

    Natural flax from Bcomp.

    150gms UD directional. multiple width.

    This material is 100% natural and excellent for all products. The stiffness is higher then glass fabric, but lower then carbon. Please see datasheet and try simulator to get an idea.

    For simulation use:

    Density: 1350

    Y modulus: 58500

    Please see datasheet for more:

    http://www.bcomp.ch/media/amplitex_5033.pdf

    Another great property is that the material works well as a dampener. This means you can use the Biaxial and UD flax together or you can combine them with glass or carbon.

    pr. 1m length. If more is ordered then it is rolled as one piece.

    Note: This fabric will take  more epoxy then glass or carbon fabric.

    Instructions: The flax fiber absorbs more resin.

    Pneumatic presses with ~5  bar is recommended to make good laminate with minimum excess resin.

    Vacuum press: follow this resin quantity recommendations: resin / (resin + fabric) = 60%
    Spread the resin well with a roll on a flat surface or pour the epoxy on to the fabric and then make a roll out of it. Then let it soak for some minutes. Much easier than try to smear it out.

     

    Tip: Use masking tape when cutting it for better result!

    SKU: N/A Category:
    7.5019.50 "incl. VAT"
  • Paulownia Ski wood core 1900 x 145 x 14 mm

    27.00 "incl. VAT"
    Add to cart

    Paulownia Ski wood core 1900 x 145 x 14 mm

    Paulownia Ski wood core

    Super light wood 280-300 kg/m3! Great properties for light skis/Snowboards.

    Super easy to work with and machine, its ideal wood core for light construction.

    Ski wood core made of Paulownia 20mm strips vertically laminated. Highest quality.

    1900 x 145 x 14 mm

    single piece wood planks!

    For a Snowboard you need 2 cores, and just join them with the epoxy resin or wood glue.

    Tip: On how to implement and improve insert/binding area durability, please read here.

    Category:
    27.00 "incl. VAT"
  • Glass fabric tape 30mm/225g

    1.00 "incl. VAT"
    Add to cart

    Glass fabric tape 30mm/225g

    Glass fabric tape

    225 g, width 30 mm

    Ideal for reinforcing insert areas or similar. Please see here for example.

    pr. 1m length. If more is ordered then it is rolled as one piece.

    Category:
    1.00 "incl. VAT"
  • Bamboo wood core 1800 x 320 x 12mm

    78.00 "incl. VAT"
    Add to cart

    Bamboo wood core 1800 x 320 x 12mm

    Ski or Snowboard Bamboo wood core 1800 x 320 x 12mm

    New Bamboo, of finest Quality Natural Vertically laminated bamboo core for ski or snowboards, but can be used in general for any other product.

    Bamboo has natural spring like properties and this improves the ride handling.

    Size: 1800 x 320 x 12mm

    Laminated natural bamboo, density about 715kg/m3. Y modulus for simulation: 13000-15000N/mm2

    For tips and more info se below!

    Category:
    78.00 "incl. VAT"
  • Polyamide/Nylon Topsheet material WHITE (ICP 8100)

    20.5023.00 "incl. VAT"
    Select options

    Polyamide/Nylon Topsheet material WHITE (ICP 8100)

    White PA polyamide/nylon Topsheet for skis, snowboard or kiteboard, wakeboard.

    Isosport ICP 8100 PA / polyamide / Nylon topsheet in white.

    Suitable for sublimation / thermal transfer. Finest colors and durability, se info below.

    PA nylon topsheet. Nylon is most tough and durable topsheet. It is harder then PBT topsheet and very scratch resistance, this is reflected in the price.

    Back is flamed and impregnated with fleece.

    PA topsheet gives more stiff ride and is a bit harder to machine, so make sure you have sharp tools.

    Outer side can be glossy, matte or with a certain structure (or brushed).

    S2 Structure and S5 structure is similar to SM structure which is fine matte.

    Pi19 us a course matte, which is similar to samd paper grit 100 or so.

    Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

    SKU: N/A Category:
    20.5023.00 "incl. VAT"
  • 2.5/140mm ABS Filler RED (pr 10cm.)

    1.50 "incl. VAT"
    Add to cart

    2.5/140mm ABS Filler RED (pr 10cm.)

    Red-Orange ABS tip/tail fill.

    Modified thermoplastic Isosport ABS insert or filler material for tip or tail.

    140mm wide, 2.5mm thick.

    Sanded and flamed, ready for use, both sides.

    If more ordered then it is delivered in one piece!

    1.50 "incl. VAT"
  • 2.0/310mm ABS Filler BLACK (pr. 10cm)

    2.50 "incl. VAT"
    Read more

    2.0/310mm ABS Filler BLACK (pr. 10cm)

    Black tip filler for skis and snowboard.
    Maximum lenght is 120cm! If you need more, please add seperately in correct lenght.
    Modified thermoplastic Isosport ABS insert or filler material for tip or tail.

    310mm wide, 2.0mm thick.

    Sanded and flamed, ready for use.

    Price is pr 100mm or 10cm.

    If more then one piece is ordered then it might be delivered in one piece!

    2.50 "incl. VAT"
  • Wakeboard/Kiteboard Paulownia wood core

    40.00 "incl. VAT"
    Add to cart

    Wakeboard/Kiteboard Paulownia wood core

    Wakeboard/Kiteboard Paulownia wood core 1520x480x12mm

    This is a kiteboards and wakeboards paulownia wood core vertically laminated.

    Paulownia is the best woodcore for kiteboards or wakeboards. It offers high durability and very light weight. It is superior to Balsa in every way, also how well it works with epoxy.

    Tip: On how to implement and improve insert/binding area durability, please read here.

    WARNING: These board are light and fragile if shipped only 1pcs. Due to the fragile nature of these boards during shipping (we protect them well in double cardboard and Fragile marks), we recommend that minimum 2pcs are bought! If you buy 1pcs, you thereby accept responsibility for any transport damage. Boards are always fixable by glue or epoxy. Once the core is covered with composite it will be good as new.

    WE CAN NOT SHIP THIS ITEM TOGETHER WITH A SKI/SNB WOOD CORE DUE TO FREIGHT RESTRICTIONS BY THE GLS/DPD.

    Category:
    40.00 "incl. VAT"
  • Sei Whale Universal All-purpose Epoxy SLOW

    54.00105.00 "incl. VAT"
    Select options

    Sei Whale Universal All-purpose Epoxy SLOW

    MIX RATIO UPDATED!
    Epoxy resin for skis and snowboard.
    Before using, read instruction below!!!

    Sei Whale is a clear, all-purpose, epoxy system with high UV resistance.
    Mix Ratio is 100:46g for Slow Hardener

     

    In general, dont mix more then 250-300mL in one container, the mix can become too hot and will harden fast.

    Low smell, low toxicity! Great to work with and more environmental!

    TDS_Sei_Whale_Epoxy_System

    Slow Cure: mix 100:46g. (45-55min pot life.)
    Tack-free time for the fast version is below 5h and less than 8h for the slow one. In general keep min. 24h in press.

    In case of heat curing (if possible use the CPM or Polar Bear version for compression heat curing), in general at 50C it will cure in 3h, at 60C it will cure in 80 minutes. I personally never went over 60C, for 80C pressing I used CPM/305 or polar bear resin.
    Make sure you use a digital scale. Mix by weight.

    Make sure you use gloves.

    SKU: N/A Category:
    54.00105.00 "incl. VAT"

Showing 25–48 of 92 results