Skis and snowboard Bio based epoxy
Skis and snowboard and kiteboard bio based epoxy resins.
Our mission is to offer High quality Bio-based, Hi-performance epoxy resin that is tested in the industry!
Great for the environment, and for your health. No smell.
Each resin comes in 2 components, Epoxy resin and hardener.
Showing all 7 results
-
Sei Whale Universal All-purpose Clear Biobased Epoxy – 3L SLOW (2000g Resin, 920g Hardener)
€104.00 "incl. VAT" Add to cartSei Whale Universal All-purpose Clear Biobased Epoxy – 3L SLOW (2000g Resin, 920g Hardener)
MIX RATIO UPDATED!
Skis and snowboard epoxy resin.
Before using, read instruction below!!!
Replacement for Entropy CLR, very similar product all in all.
Sei Whale is a clear, all-purpose, epoxy system with high UV resistance.
Choose between various pot life times. Fast or Slow.
Mix Ratio is 100:46g for Fast Hardener
Mix Ratio is 100:50g for Slow Hardener
In general, dont mix more then 250-300mL in one container, the mix can become too hot and will harden fast.
Low smell, low toxicity! Great to work with and more environmental!
Fast Cure: mix: 100:50g. (14-17 min pot life)Slow Cure: mix 100:46g. (45-55min pot life.)Tack-free time for the fast version is below 5h and less than 8h for the slow one.
In case of heat curing (if possible use the CPM or Polar Bear version for compression heat curing), in general at 50C it will cure in 3h, at 60C it will cure in 80 minutes. I personally never went over 60C, for 80C pressing I used CPM/305 or polar bear resin.Make sure you use a digital scale. Mix by weight.Make sure you use gloves.
€104.00 "incl. VAT" -
Polar Bear – Heated compression bio based epoxy 3L (2000g Epoxy, 920g Hardener)
€104.00 "incl. VAT" Add to cartPolar Bear – Heated compression bio based epoxy 3L (2000g Epoxy, 920g Hardener)
Skis and snowboard epoxy resin.
Before using, read instruction below!!!
Replacement for Entropy CPM/CPL, very similar product all in all.
Pot life 25min @ 25C.
The compression molding Polar Bear Biobased Epoxy System is designed for heat curing applications. Skis and snowboard manufacturing (also kite/wakeboards).
Polar bear is a heated compression bio based epoxy.
- Applications: Polar Bear Recyclable Epoxy System is specifically formulated for compression molding applications, such as for skis and snowboard manufacturing. Heat assisted curing.
- Mix Ratio: 100:46 by weight
Link to the TDS: TDS_POLARBEAR_bio(1)
Make sure you use a digital scale. Mix by weight.Make sure you use gloves.
€104.00 "incl. VAT" -
Sei Whale – Universal All-purpose Clear Biobased Epoxy – 1,5L FAST (1000g Resin, 500g Hardener)
€54.00 "incl. VAT" Add to cartSei Whale – Universal All-purpose Clear Biobased Epoxy – 1,5L FAST (1000g Resin, 500g Hardener)
MIX RATIO UPDATED!Epoxy resin for skis and snowboard.
Before using, read instruction below!!!Replacement for Entropy CLR, very similar product all in all.
Sei Whale is a clear, all-purpose, epoxy system with high UV resistance.Choose between various pot life times. Fast or Slow.Mix Ratio is 100:50g for Fast Hardener
Mix Ratio is 100:46g for Slow Hardener
In general, dont mix more then 250-300mL in one container, the mix can become too hot and will harden fast.
Low smell, low toxicity! Great to work with and more environmental!
Fast Cure: mix: 100:50g. (14-17 min pot life)Slow Cure: mix 100:46g. (45-55min pot life.)Tack-free time for the fast version is below 5h and less than 8h for the slow one.
In case of heat curing (if possible use the CPM or Polar Bear version for compression heat curing), in general at 50C it will cure in 3h, at 60C it will cure in 80 minutes. I personally never went over 60C, for 80C pressing I used CPM/305 or polar bear resin.Make sure you use a digital scale. Mix by weight.Make sure you use gloves.
€54.00 "incl. VAT" -
Polar Bear – Heated compression bio based epoxy 1,5L (1000g Epoxy, 460g Hardener)
€54.00 "incl. VAT" Add to cartPolar Bear – Heated compression bio based epoxy 1,5L (1000g Epoxy, 460g Hardener)
Epoxy resin for skis and snowboard.Before using, read instruction below!!!
Replacement for Entropy CPM/CPL, very similar product all in all.
Pot life 25min @ 25C.
The compression molding Polar Bear Biobased Epoxy System is designed for heat curing applications. Skis and snowboard manufacturing (also kite/wakeboards).
Polar bear is a heated compression bio based epoxy.
- Applications: Polar Bear Recyclable Epoxy System is specifically formulated for compression molding applications, such as for skis and snowboard manufacturing. Heat assisted curing.
- Mix Ratio: 100:46 by weight
Link to the TDS: TDS_POLARBEAR_bio(1)
Make sure you use a digital scale. Mix by weight.Make sure you use gloves.
€54.00 "incl. VAT" -
Sei Whale – Universal All-purpose Clear Biobased Epoxy – 1,5L SLOW (1000g Resin, 460g Hardener)
€54.00 "incl. VAT" Add to cartSei Whale – Universal All-purpose Clear Biobased Epoxy – 1,5L SLOW (1000g Resin, 460g Hardener)
MIX RATIO UPDATED!Epoxy resin for skis and snowboard.Before using, read instruction below!!!Replacement for Entropy CLR, very similar product all in all.
Sei Whale is a clear, all-purpose, epoxy system with high UV resistance.
Choose between various pot life times. Fast or Slow.
Mix Ratio is 100:50g for Fast Hardener
Mix Ratio is 100:46g for Slow Hardener
In general, dont mix more then 250-300mL in one container, the mix can become too hot and will harden fast.
Low smell, low toxicity! Great to work with and more environmental!
Fast Cure: mix: 100:500g. (14-17 min pot life)Slow Cure: mix 100:46g. (45-55min pot life.)Tack-free time for the fast version is below 5h and less than 8h for the slow one.
In case of heat curing (if possible use the CPM or Polar Bear version for compression heat curing), in general at 50C it will cure in 3h, at 60C it will cure in 80 minutes. I personally never went over 60C, for 80C pressing I used CPM/305 or polar bear resin.Make sure you use a digital scale. Mix by weight.Make sure you use gloves.
€54.00 "incl. VAT" -
(PU) Urethane Resin Smooth Cast 65D (sidewalls, insert/fin, underfoot area)
€38.00 "incl. VAT" Add to cart(PU) Urethane Resin Smooth Cast 65D (sidewalls, insert/fin, underfoot area)
Polyurethane PU resin for sidewalls for skis and snowboards.
Smooth cast 65D, Polyurethane resin for pouring sidewalls, tip/tail filler, for insert area or fin area, underfoot reinforcement or even for topcoat or similar. Gives nice smooth finish. Easy to bind to epoxy after just machining.
Easy to work with, super durable and easy to machine. Bounding with epoxy needs no treatment.
Urethane resin can easily be poured in a channel and hardens quickly. It gives very durable and hard to break sidewalls, easy to machine and binds easily to other layers without flaming/sanding.
€38.00 "incl. VAT" -
100% Alcohol Wipe
€0.25 "incl. VAT" Add to cart100% Alcohol Wipe
100% Isopropyl Alcohol Wipes for cleaning your sidewalls and tip/tail fill insert material prior flaming for proper bond, or for cleaning your equipment from epoxy.
Wipeing your sidewalls or filler materials with alcohol will greatly improve the bound to the epoxy, and decrease the chance of delamination later on!
price is pr.1 piece.
Read more: https://www.junksupply.com/flaming-and-sanding-sidewalls-or-the-tip-filler-ptex/
€0.25 "incl. VAT"
Showing all 7 results