Wood core

Snowboard wood core, Ski wood core and kiteboard wood core and wakeboard wood core.

Here you will find some of the best wood core quality grade for board sports. More or less you can select any wood core for any type of a ride, however some are better then other for your specific application whether it is ski, snowbaord, kite/wakeboard or a long/skateboard.

We have Paulownia wood core, which is totally natural and renewable. It gives some of the best weight to strength and performance properties.

We have Bamboo which is also totally natural and renewable. It is dense and strong it gives natural spring like properties.

We have replaced the Maple with local european Baltic Birch, which is a great, tough and durable product.

We have Poplar and Birch cores, which are also European woods, easily renewable and give great weight vs. performance properties for majority of products.

Showing all 11 results

  • Baltic Birch veneer

    Sale! 3.95 "incl. VAT"
    Select options

    Baltic Birch veneer

    Finest grade Baltic Birch veneer for skateboard and longboard decks. 1.5mm thick.

    Local wood as durable as Maple veneer! Birch veneer is not less durable them Maple, this is just a hype. Use local!

    Works well with our Epoxy resin.

    Make sure when you make your ride, to seal the edges with epoxy/varnish (wood glue does not always works as well) to prevent water intrusion. This will make your ride last.

     

    Quantity prices (excl. VAT):

    50+ : 3.75 euro/pcs

    100+: 3.55 euro/pcs

    200+: 3.35 euro/pcs.

    please contact us for order.

    SKU: 100 Category:
    3.95 "incl. VAT"
  • Poplar/Beech Snowboard wood core 1700x320x9mm

    28.50 "incl. VAT"
    Add to cart

    Poplar/Beech Snowboard wood core 1700x320x9mm

    Poplar/Beech stringers Snowboard wood core

    Great wood core from Slovenia for snowboards. Poplar wood core with Beech stringers end to end thru the insert area.

    Poplar wood core with Beech stringers in the insert area (2pcs)

    1700 x 320 x 9mm

    single piece wood planks!

    laminated of 25mm wide strips.

    price is pr. piece.

    Category:
    28.50 "incl. VAT"
  • Poplar/Beech Ski wood core 1900x160x13mm

    24.50 "incl. VAT"
    Add to cart

    Poplar/Beech Ski wood core 1900x160x13mm

    Poplar/Beech stringers Ski wood core

    Popular choice for most skis!

    1900 x 160 x 13

    single piece wood planks!

    price for 1 wood core!

    Poplar wood core with Beech stringers in the screw area.

    Category:
    24.50 "incl. VAT"
  • Ash Ski wood core 1900x155x12.5mm

    30.50 "incl. VAT"
    Add to cart

    Ash Ski wood core 1900x155x12.5mm

    Ash Ski wood core

    Fantastic looks and performance from Ash wood cores made of european Ash wood, with single pieces wood from top to bottom. Ash is great wood for skis and a benefit also is that it is resistant to water, so you can make your skis without using any additional sidewalls.

    dimensions: 1900x155x12,5mm

    single piece wood planks!

    For a Snowboard you need 2 cores, and just join them with the epoxy resin or wood glue.

    Density about 700kg/m3, Y modulus about 13000

    PS: We do not ship any ski or snowboard wood cores together with kite or wake cores. The size is too big for transport.

    Category:
    30.50 "incl. VAT"
  • Paulownia Ski wood core 1900 x 145 x 14 mm

    27.00 "incl. VAT"
    Add to cart

    Paulownia Ski wood core 1900 x 145 x 14 mm

    Paulownia Ski wood core

    Super light wood 280-300 kg/m3! Great properties for light skis/Snowboards.

    Super easy to work with and machine, its ideal wood core for light construction.

    Ski wood core made of Paulownia 20mm strips vertically laminated. Highest quality.

    1900 x 145 x 14 mm

    single piece wood planks!

    For a Snowboard you need 2 cores, and just join them with the epoxy resin or wood glue.

    Tip: On how to implement and improve insert/binding area durability, please read here.

    Category:
    27.00 "incl. VAT"
  • Bamboo wood core 1800 x 320 x 12mm

    78.00 "incl. VAT"
    Add to cart

    Bamboo wood core 1800 x 320 x 12mm

    Ski or Snowboard Bamboo wood core 1800 x 320 x 12mm

    New Bamboo, of finest Quality Natural Vertically laminated bamboo core for ski or snowboards, but can be used in general for any other product.

    Bamboo has natural spring like properties and this improves the ride handling.

    Size: 1800 x 320 x 12mm

    Laminated natural bamboo, density about 715kg/m3. Y modulus for simulation: 13000-15000N/mm2

    For tips and more info se below!

    Category:
    78.00 "incl. VAT"
  • Wakeboard/Kiteboard Paulownia wood core

    40.00 "incl. VAT"
    Add to cart

    Wakeboard/Kiteboard Paulownia wood core

    Wakeboard/Kiteboard Paulownia wood core 1520x480x12mm

    This is a kiteboards and wakeboards paulownia wood core vertically laminated.

    Paulownia is the best woodcore for kiteboards or wakeboards. It offers high durability and very light weight. It is superior to Balsa in every way, also how well it works with epoxy.

    Tip: On how to implement and improve insert/binding area durability, please read here.

    WARNING: These board are light and fragile if shipped only 1pcs. Due to the fragile nature of these boards during shipping (we protect them well in double cardboard and Fragile marks), we recommend that minimum 2pcs are bought! If you buy 1pcs, you thereby accept responsibility for any transport damage. Boards are always fixable by glue or epoxy. Once the core is covered with composite it will be good as new.

    WE CAN NOT SHIP THIS ITEM TOGETHER WITH A SKI/SNB WOOD CORE DUE TO FREIGHT RESTRICTIONS BY THE GLS/DPD.

    Category:
    40.00 "incl. VAT"
  • Poplar/Paulownia Snowboard wood core 1700x320x9mm

    27.50 "incl. VAT"
    Add to cart

    Poplar/Paulownia Snowboard wood core 1700x320x9mm

    Poplar/Paulownia lite Snowboard wood core

    A lite version of popular snowboard wood core.

    Poplar wood core mix with Paulownia, vertically laminated.

    1700 x 320 x  9mm thick

    single piece wood planks!

    laminated of ~~25mm wide strips.

    Tip: On how to implement and improve insert/binding area durability, please read here.

    Price is pr. piece.

     

    Category:
    27.50 "incl. VAT"
  • Bcomp Bcore 200 ski wood core 1900mm x 143mm x 14mm

    30.00 "incl. VAT"
    Read more

    Bcomp Bcore 200 ski wood core 1900mm x 143mm x 14mm

    Bcomp no longer makes the wood cores. If possible to find again we will get them on stock . For now Paulownia is a suitable alternative.

    Ski wood core Balsa/Flax core Bcomp ski wood core

    This is the new ultra lite core from the Swiss bComp. Lighter than Paulownia about 15-20%.

    bCore 200 – light balsa/flax mix wood core:  1900mm x 143mm x 14mm.

    bCores™200_en(1)

    Tip: On how to implement and improve insert/binding area durability, please read here.

    For simulation use: density of 235kg/m3, Y-modulus of 2200 N/mm.

    The final core compared to Paulownia is usually some 10% thicker for same stiffness results. Please simulate.

    weight ca. 900 g ( +/- about 80 g )

    Price is pr piece!

    Category:
    30.00 "incl. VAT"
  • Splitboard wood core Paulownia/Poplar

    36.0041.00 "incl. VAT"
    Select options

    Splitboard wood core Paulownia/Poplar

    Splitboard snowboard wood core

    A lite and durable wood core made of Paulownia and Poplar mix, vertically laminated interchanging strips of 25mm. 10mm abs strip in the middle.

    For simulation use: 400kg/m3 densnity and 6800N/mm Y modulus.

    This is how we suggest to do insert area on these cores to avoid any pulling out of inserts, read here.

    Choose between several dimensions.

    SKU: N/A Category:
    36.0041.00 "incl. VAT"
  • Splitboard snowboard Poplar/Beech core

    36.00 "incl. VAT"
    Add to cart

    Splitboard snowboard Poplar/Beech core

    Splitboard snowboard Poplar/Beech core

    A wood core made of Poplar reinforced with 2 Beech wood stringers thru the board insert area, vertically laminated interchanging strips of 25mm. 10mm abs strip in the middle.

    For simulation use approx.: Density of 430N/mm and Y-modulus of 9300

    This is how we suggest to do insert area on these cores to avoid any pulling out of inserts, read here.

    Below you can find a detailed drawing of the core.

    Category:
    36.00 "incl. VAT"

Showing all 11 results