Description
Clear Base for kiteboards and wakeboards.
Topsheet for skis, snowboards, kiteboards and wakeboards.
Clear base, (~70% transparency ) 0.4mm thick, for wakeboards and kiteboards. Very comfortable, affordable and good choice for bottom or top.
The material is grinded and flame treated on one side and structured on outside.
| Temp. | 130 °C |
| Heating time | min.300 Sek. |
| Cooling time | 300 Sek |
Some manufacturers call this ptex sintered base for ski and snowboard.
Read more on sublimation here: https://www.junksupply.com/sublimation-heat-transfer-of-graphics-on-plastics/
No protective film!
Clear base, (~70% transparency ) 0.4mm thick. You can also use it as a clear topsheet. This is a cross extruded base so it is not a tough base as sintered and is not for heavy duty use.
PS: Please before using check if your topsheet has protective film on the outside. We try as ofen as we can to get topsheet with protective film but some batches do not have it. In this case you can tape the topside of your topsheet with clear application tape (ebay) or contact paper for protection of needed.
