IS 7200 1.2/330mm Sintered base BEIGE

15.50 "incl. VAT"

Please flame this base before use, or do a adhesion test first, as it might have weakened over time.

7200 2G2GV W 812 1,2/330 BEIGE

Color P 7540 C

Tough sintered base for ski and snowboard. IS 7200.

It is 1.2mm thick, this should fit with 1.2mm edges with no problem.

1m price, for orders of more then 1m, a single piece is supplied

This material is sanded and flamed both sides already. We recommend you flame it just prior to the layup quickly, in order to renew flaming and best adhesion, if possible,

Sanding and Flaming Sidewalls or the tip filler material for best epoxy adhesion


before cutting, lay the base on a flat table for about 48h the base will start to relax. The heating tunnel is just a fast way to bring out the tension.

Storage: Room temperature with low temperature fluctuations. Humidity should not be too high. You can store it on the roll. If you recognize some wraping you can also try to wind it in other direction for storage.

128 in stock



7200 2G2GV W 812 1,2/330 BEIGE

IS 7200 Isosport. Ptex sintered base for ski and snowboard.

Sanded and flamed both sides

Color: Beige

This is some of the highest quality and toughest fast sintered base, UHMW. Ultra hight molecular weight polyethyline.

Width is 330mm and thickness is 1.2mm. Price pr.m.

Base is sanded and flamed on both sides for best binding properties with epoxy

Some manufacturers call this ptex sintered base for ski and snowboard.

Quantity prices

please contact  us for order.

base 7200

Additional information

Weight 0.4 kg