IS6000 0.8/480mm Crosslinked base CLEAR (sublimation)

13.90 "incl. VAT"

On stock again around 1st November 2021!

Thick and durable crosslinked base Is6000. The molecular structure is getting crosslinked in a separate process in order to achieve similar properties compared to sintered bases. Used for among other wakeboard grind base.

thickness 0,8mm.

width 480mm.

The base is sanded both sides from now on. Other type is not manufactured.

Will be 60% clear when laminated, graphics visible from inside, see pictures below.

Price is pr 1m. For orders of more then 1m, a one single roll is supplied.

Graphics with Sublimation. If UV or Latex printing is only option, do tests with primer first.

Read more on sublimation here: https://www.junksupply.com/sublimation-heat-transfer-of-graphics-on-plastics/

Out of stock

Description

IS crosslinked base IS 6000 TD Isosport. It is modified and stabilized for sublimation/graphics transfer. It is Clear.

This is high quality and durable crosslinked base. Very close to sintered. More durable can not be produced by Isosport for wakeboards.

It is the toughest base Isosport can produce in this width. It is custom produced and therefore limited quantity.

The molecular structure is getting crosslinked in a separate process in order to achieve similar properties compared to sintered bases.

Base is sanded and flamed on both sides. Make sure you use outer side as epoxy side!

This base can fit with slim 0.9mm step edges.

Make sure you use outer side of the roll as epoxy side!

Recomandations from Isosport on sublimation, but this can be experimented with to get best results.

Some manufacturers call this a ptex base.

Temp. 130 °C
Heating time min.300 Sek.
Cooling time 300 Sek

Some manufacturers call this ptex sintered base for ski and snowboard.

6000-baseDSC_2037 DSC_2032

 

Additional information

Weight 0.475 kg