€2.00 "incl. VAT"
This is a quality magnetic tape for use with our M6 inserts.
You can cut it in small pieces and attache it to the ‘hat’ or top of the inserts. This will help you find your insert during drilling. It is very helfull if your inserts are not visable due to carbon, graphics or similar.
12mm wide. 1mm thick.
Price is pr 250mm length.
This is a quality magnetic tape for use with our M6 inserts.
You can cut it in small pieces and attache it to the ‘hat’ or top of the inserts. This will help you find your insert during drilling. It is very helfull if your inserts are not visable due to carbon, graphics or similar.
12mm wide. 0.75mm thick.
Price is pr 250mm length.
| Weight | 0.02 kg |
|---|
100% Isopropyl Alcohol Wipes for cleaning your sidewalls and tip/tail fill insert material prior flaming for proper bond, or for cleaning your equipment from epoxy.
Wipeing your sidewalls or filler materials with alcohol will greatly improve the bound to the epoxy, and decrease the chance of delamination later on!
price is pr.1 piece.
Read more: https://www.junksupply.com/flaming-and-sanding-sidewalls-or-the-tip-filler-ptex/
The Union Clips and Hooks are simple and easy to assemble.
These clips are a full set and come with all needed screws and assembly.
Snowboard and Kiteboard M6 Inserts for DIY.
Quality snowboard and kiteboard inserts produced in EU. With cap, to prevent resin going in.
Snowboard inserts: Cr-Ni stainless steel A2 (AISI 304)
Kiteboard inserts: Nautic stainless steel A4 (AISI 316)
Magnetic tape also available in store!
The insert is M6 x 1 and is 6mm-10.5mm high. If you need it to be magnetic, you can put a magnetic tape on top.
The Kite version is Nautic stainless steel A4 ( AISI 316 ) which does not ever rust.
