Polyamide/Nylon Topsheet material WHITE (ICP 8100)

20.5023.00 "incl. VAT"

White PA polyamide/nylon Topsheet for skis, snowboard or kiteboard, wakeboard.

Isosport ICP 8100 PA / polyamide / Nylon topsheet in white.

Suitable for sublimation / thermal transfer. Finest colors and durability, se info below.

PA nylon topsheet. Nylon is most tough and durable topsheet. It is harder then PBT topsheet and very scratch resistance, this is reflected in the price.

Back is flamed and impregnated with fleece.

PA topsheet gives more stiff ride and is a bit harder to machine, so make sure you have sharp tools.

Outer side can be glossy, matte or with a certain structure (or brushed).

S2 Structure and S5 structure is similar to SM structure which is fine matte.

Pi19 us a course matte, which is similar to samd paper grit 100 or so.

Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

SKU: N/A Category:

Description

White PA polyamide/nylon Topsheet for skis, snowboard or kiteboard, wakeboard.

Isosport ICP 8100 PA / polyamide / Nylon topsheet in white. For sublimation.

Back is flamed and impregnated with fleece.

The best and toughest topsheet available on the market.

Graphics can be done with Sublimation.  See guidelines on the bottom of the page.

Read more on sublimation here: https://www.junksupply.com/sublimation-heat-transfer-of-graphics-on-plastics/

Make sure you turn it correctly! See the description or contact us! 

TIP: When cutting your product be gentle and find the sharp tools and right speed, this topsheet is harder to cut then TPU or ptex.

PS: Please before using check if your topsheet has protective film on the outside. We try as often as we can to get topsheet with protective film but some batches do not have it. In this case you can tape the topside of your topsheet with clear application tape (ebay) or contact paper for protection of needed.

Suitable for sublimation:

Recommended max. 160-165 degree C  and time cycle of about 5min or so, however it can vary up to 10min, depending on your setup. Please do tests first on small pieces before you do a full one.  Allow also good cooling time!

For this topshet it is very important to first let it aclimate for about 30sec before clamping it, and also it is important that the transfer paper is of the highest quality. Please note that using a rubber sillicone inlay can help to distribute the pressure and give better results. IF there is an issue with topsheet graphics, so that there is a pattern residue that is not desired, this might be due to the paper quality. One known quality transfer paper is Sappi transjet sportsline 100g.

Topsheet that is flamed only might weaken the bound after sublimation, so make sure you do it for minimum time and temperature possible in order to keep the good bound to epoxy. Do tests first. Sanded version is bit less sensitive to this. After the cooling it is good idea to flame treat the base/topsheet (PA nylon) to improve adhesion to epoxy.

Sublimation will affect the bounding to epoxy. Since the grinded side will be less affected and present better bounding values, it is recommended to use the grinded side as epoxy side. If topsheet is not grinded, only flamed, do testing and find minimum sublimation time at the temperature!  Best graphics results of sublimation are on the smooth glossy side.

PS: Please before using check if your topsheet has protective film on the outside. We try as ofen as we can to get topsheet with protective film.

 

 

isosport8210

Additional information

Weight 0.25 kg
Select size and type

(ICP 8100) 0.5/350mm White (Glossy, flamed inside, with fleece inside), (ICP 8100) 0.5/340mm White (Pi19 Corund, matte like grip tape, flamed inside, with fleece inside), (ICP 8100) 0.45/510mm White (S2 structure outside, flamed inside, with fleece inside)