1.2mm Ptex Sintered Base CLEAR (IS 7500)

9.0019.50 "incl. VAT"

Clear sintered ptex base for skis and snowboard. Sintered Base for skis and snowboard UHMW PE base ptex.

Tough sintered highest quality base for ski and snowboard.

IS7500 from Isosport

Suitable for sublimation. Clear.

It is 1.2mm thick, this should fit with 1.2mm edges with no problem.

available width: 145mm – 350mm.

1m price, for orders of more then 1m, a single piece is supplied

For more info, see below!

SKU: N/A Category:

Description

Clear sintered ptex base for skis and snowboard. Sintered Base for skis and snowboard UHMW PE base ptex.

IS Sintered base 7500 Isosport. It is also stabilized for sublimation/graphics transfer. It is Clear.

This is of the highest quality and toughest fast sintered base, UHMW . Ultra hight molecular weight polyethyline.

Width is 145- 350mm and thickness is 1.2mm. Price pr.m.

Base is sanded and flamed on both sides for best binding properties with epoxy

Recommandations from Isosport on sublimation, but this can be experimented with to get best results.

Temp. 135 °C
Heating time 500 Sek.
Cooling time 300 Sek

Some manufacturers call this ptex sintered base for ski and snowboard.

before cutting, lay the base on a flat table for about 48h the base will start to relax. The heating tunnel is just a fast way to bring out the tension.

Storage: Room temperature with low temperature fluctuations. Humidity should not be too high. You can store it on the roll. If you recognize some wraping you can also try to wind it in other direction for storage.

base 7500

 

 

 

Additional information

Weight 0.5 kg
Width

IS7500 1.2/145mm – ski, IS7500 1.2/330mm, IS7500 CC 1.2/350mm