DIY Ski/Snowboard/Kiteboard/Wakeboard materials Shop

[divider]

Showing 1–32 of 92 results

12/24/48/All

  • Splitboard DIY Package Kit

    €280.00 – €495.00 "incl. VAT"     Select options

    Splitboard DIY Package Kit

    A splitboard  diy package kit for making your own splitboard.

    Splitboard package kit. Includes all you need to build your own splitboard.

    • 1 splitboard wood core – poplar/paulownia or poplar/beech combo with 10mm abs in the middle.
    • 7,5m stainless steel edges 1.2mm
    • 1.75m triaxial glass fabric or carbon/flax mix for great performance and light weight
    • 1,2L epoxy resin
    • 2 ABS sidewalls
    • 7,5m VDS 25mm rubber
    • 1.75m ptex base
    • 1.75m topsheet
    • 1 x tip/tail filler insert material
    • 34 M6 inserts
    • optional splitboard clips

    We suggest you also add 6m UD carbon 50mm stringers for the 25oz triax glass version, so you can keep the core lite and thin, while still be able to get stiffness and improved performance.

    Slitboard clip inserts M5x1 height 3.1mm are also available in store.

    Tip: On how to implement and improve insert/binding area durability, please read here.

    We suggest you add 3-6m of 50mm carbon ud stringers in case you wish a reasonably thin ride with improved stiffness.

    Simulator example: splitboard simulate design example

    SKU: N/A Category:
    €280.00 – €495.00 "incl. VAT"

  • Ski DIY heavy package kit (Ash or Bamboo core)

    €295.00 – €410.00 "incl. VAT"     Select options

    Ski DIY heavy package kit (Ash or Bamboo core)

    Skis diy kit package to build your own skis.

    All you need to build own skis!

    Wood core is a dense wood core of either Ash or Bamboo. Due to the nature of bamboo, it does not have loads of torsional stiffness, so it benefits from carbon stringers diagonally or carbon biax. You can add this seperatelly for top and bottom also if you like.

    Read first how to work with the materials: https://www.junksupply.com/how-to-work-with-our-materials/

    Item contains: 2 pcs Ash or Bamboo ski wood core, base + topsheet,  fabric, 1,2L  epoxy,  8m of 25mm VDS, 8m steel edges, 4 sidewalls + tip/tail fill

    Fabric options:

    1. 25oz Glass fabric. Add UD stringers separately if you need extra pop.
    2. Biax carbon + UD Bcomp flax: 2m carbon biax 300gms fabric for top and bottom and 2m 300gms UD bcomp fabric for top. You get premium ultra-responsive performance ski that is damped with bcomp fabric. Best of both worlds..
    3. Biax Bcomp Flax + UD carbon: 2m Bcomp biax 350gms flax fabric for top and bottom and 2m 130gms UD carbon fabric for top and bottom. You get a responsive ski, with great characteristics between the carbon one and glass one. It is also very much environmentally friendly.

    We recommend you add one 100% alcohol wipe pr. sidewall, at least for cleaning and improved adhesion, read here.

    SKU: 10-2 Category:
    €295.00 – €410.00 "incl. VAT"

  • Snowboard DIY Bamboo package kit

    €295.00 – €360.00 "incl. VAT"     Select options

    Snowboard DIY Bamboo package kit

    Snowboard DIY standard package kit to make your own snowboard.

    All you need to build own Bamboo snowboard!

    Read first how to work with the materials: https://www.junksupply.com/how-to-work-with-our-materials/

    • snowboard Bamboo , 1800 x 320 x 12mm
    • 25oz triaxial glass fabric or carbon/flax mix for great performance and light weight.
    • 24pcs m6 inserts,
    • 1.2L epoxy,
    • 4m of 25mm VDS,
    • 2 sidewalls of your choice
    • tip/tail insert filler
    • 1.8m topsheet and base of your choice
    • 3.6m steel edges.

    Due to the nature of bamboo, it does not have loads of torsional stiffness, so it benefits from carbon stringers diagonally or carbon biax. You can add this separately for top and bottom also if you like.

    We recommend you add one 100% alcohol wipe pr. sidewall at least, for cleaning and improved adhesion, read here.

    SKU: N/A Category:
    €295.00 – €360.00 "incl. VAT"

  • Ski DIY Lite package kit (Paulownia or Bcomp 200 core)

    €295.00 – €350.00 "incl. VAT"     Select options

    Ski DIY Lite package kit (Paulownia or Bcomp 200 core)

    Skis diy kit package to build your own skis.

    All you need to build own lite weight highest quality skis!

    Read first how to work with the materials: https://www.junksupply.com/how-to-work-with-our-materials/

    Item contains: 2 pcs Paulownia or Bcomp 200 (see wood category for more info), base + topsheet,  composite fabric of your choice, 1.2L  epoxy,  8m of 25mm VDS, 8m steel edges, 4 sidewalls + tip/tail fill.

    Fabric options:

    1. 25oz triax Glass fabric. Add UD stringers separately if you need extra pop.
    2. Biax carbon + UD Bcomp flax: 2m carbon biax 300gms fabric for top and bottom and 2m 300gms UD bcomp fabric for top and bottom. You get premium ultra-responsive performance ski that is damped with bcomp fabric. Best of both worlds..
    3. Biax Bcomp Flax + UD carbon: 2m Bcomp biax 350gms flax fabric for top and bottom and 2m 130gms UD carbon fabric for top and bottom. You get a responsive ski, with great characteristics between the carbon one and glass one. It is also very much environmentally friendly.

    We recommend you add one 100% alcohol wipe pr. sidewall, at least for cleaning and improved adhesion, read here.

    SKU: 10-1 Category:
    €295.00 – €350.00 "incl. VAT"

  • Ski DIY package kit (Poplar/Beech woodcore)

    €265.00 – €335.00 "incl. VAT"     Select options

    Ski DIY package kit (Poplar/Beech woodcore)

    DIY ski standard package kit for making your own skis.

    All you need to build own skis!

    Read first how to work with the materials: https://www.junksupply.com/how-to-work-with-our-materials/

    Item contains: 2 pcs Poplar with 2 beech stringers ski wood core, base + topsheet,  fabric, 1,2L  epoxy,  8m of 25mm VDS, 8m steel edges, 4 sidewalls + tip/tail fill

    Fabric options:

    1. 25oz Glass fabric. Add UD stringers separately if you need extra pop.
    2. Biax carbon + UD Bcomp flax: 2m carbon biax 300gms fabric for top and bottom and 2m 300gms UD bcomp fabric for top. You get premium ultra-responsive performance ski that is damped with bcomp fabric. Best of both worlds..
    3. Biax Bcomp Flax + UD carbon: 2m Bcomp biax 350gms flax fabric for top and bottom and 2m 130gms UD carbon fabric for top and bottom. You get a responsive ski, with great characteristics between the carbon one and glass one. It is also very much environmentally friendly.

    We recommend you add one 100% alcohol wipe pr. sidewall, at least for cleaning and improved adhesion, read here.

    SKU: 10 Category:
    €265.00 – €335.00 "incl. VAT"

  • Snowboard DIY lite package kit (Poplar/Paulownia core)

    €235.00 – €295.00 "incl. VAT"     Select options

    Snowboard DIY lite package kit (Poplar/Paulownia core)

    Snowboard DIY standard package kit to make your own snowboard.

    All you need to build own snowboard!

    Read first how to work with the materials: https://www.junksupply.com/how-to-work-with-our-materials/

    • Poplar with paulownia stringers thru insert area, wood core.
    • 25oz triaxial glass fabric or carbon/flax mix for great performance and light weight.
    • 24pcs m6 inserts,
    • 1.2L epoxy,
    • 4m of 25mm VDS,
    • 2 sidewalls of your choice
    • tip/tail insert filler
    • 1.8m topsheet and base of your choice
    • 3.6m steel edges.

    We recommend you add one 100% alcohol wipe pr. sidewall at least, for cleaning and improved adhesion, read here.

    SKU: N/A Category:
    €235.00 – €295.00 "incl. VAT"

  • Snowboard DIY package kit (Poplar/beech woodcore)

    €220.00 – €285.00 "incl. VAT"     Select options

    Snowboard DIY package kit (Poplar/beech woodcore)

    Snowboard DIY standard package kit to make your own snowboard.

    All you need to build own snowboard!

    Read first how to work with the materials: https://www.junksupply.com/how-to-work-with-our-materials/

    • Poplar with beech stringers thru insert area, wood core.
    • 25oz triaxial glass fabric or carbon/flax mix for great performance and light weight.
    • 24pcs m6 inserts,
    • 1.2L epoxy,
    • 4m of 25mm VDS,
    • 2 sidewalls of your choice
    • tip/tail insert filler
    • 1.8m topsheet and base of your choice
    • 3.6m steel edges.

    We recommend you add one 100% alcohol wipe pr. sidewall at least, for cleaning and improved adhesion, read here.

    SKU: N/A Category:
    €220.00 – €285.00 "incl. VAT"

  • Wakeboard / Kiteboard DIY Package kit

    €159.00 – €169.00 "incl. VAT"     Select options

    Wakeboard / Kiteboard DIY Package kit

    Wakeboard / Kiteboard DIY Package kit to make your own kiteboard / wakeboard.

    Build a highest quality wakeboard/kiteboard your self.

    In the wakeboard / Kiteboard package you have all the materials needed to build a wakeboard or a Kiteboard

    • 1 Paulownia wood plank, perfect wood for core
    •  3m tri-axial 618g/22oz glass fabric 480mm wide
    • 14 x m6 inserts for salt water
    • 1.5m topsheet and 1.5m base of highest quality
    • 1,2L bio based epoxy resin.

    Sidewall material is optional. We recommend you add one 100% alcohol wipe pr. sidewall at leaset for cleaning and improved adhesion, read here.

    For tips and more info se below!

    SKU: N/A Category:
    €159.00 – €169.00 "incl. VAT"

  • Ski & snowboard edge bender Pro

    €120.00 "incl. VAT"     Add to cart

    Ski & snowboard edge bender Pro

    Ski and snowboard edge bending tool.

    Edge bender for mounting on a vice. By having it on a vice, you can adjust any radius you like.

    This edge bender can bend edges in 2 dimensions, for the base and for the tip/tail. See pictures on the bottom.

    Fits edges step 1.2-1.8mm

    suggested mounting distance between the 2 smaller wheels: 62mm.

    Categories: ,
    €120.00 "incl. VAT"

  • Sei Whale Universal All-purpose Clear Biobased Epoxy – 3L SLOW (2000g Resin, 920g Hardener)

    €104.00 "incl. VAT"     Add to cart

    Sei Whale Universal All-purpose Clear Biobased Epoxy – 3L SLOW (2000g Resin, 920g Hardener)

    MIX RATIO UPDATED!

    Skis and snowboard epoxy resin.

    Before using, read instruction below!!!

    Replacement for Entropy CLR, very similar product all in all.

    Sei Whale is a clear, all-purpose, epoxy system with high UV resistance.

    Choose between various pot life times. Fast or Slow.

    Mix Ratio is 100:46g for Fast Hardener

    Mix Ratio is 100:50g for Slow Hardener

    In general, dont mix more then 250-300mL in one container, the mix can become too hot and will harden fast.

    Low smell, low toxicity! Great to work with and more environmental!

    TDS_Sei_Whale_Epoxy_System

    Fast Cure: mix: 100:50g. (14-17 min pot life)
    Slow Cure: mix 100:46g. (45-55min pot life.)
    Tack-free time for the fast version is below 5h and less than 8h for the slow one. 

    In case of heat curing (if possible use the CPM or Polar Bear version for compression heat curing), in general at 50C it will cure in 3h, at 60C it will cure in 80 minutes. I personally never went over 60C, for 80C pressing I used CPM/305 or polar bear resin.
    Make sure you use a digital scale. Mix by weight.

    Make sure you use gloves.

    Category:
    €104.00 "incl. VAT"

  • Polar Bear – Heated compression bio based epoxy 3L (2000g Epoxy, 920g Hardener)

    €104.00 "incl. VAT"     Add to cart

    Polar Bear – Heated compression bio based epoxy 3L (2000g Epoxy, 920g Hardener)

    Skis and snowboard epoxy resin.

    Before using, read instruction below!!!

    Replacement for Entropy CPM/CPL, very similar product all in all.

    Pot life 25min @ 25C.

    The compression molding Polar Bear Biobased Epoxy System is designed for heat curing applications. Skis and snowboard manufacturing (also kite/wakeboards).

    Polar bear is a heated compression bio based epoxy.

    • Applications: Polar Bear Recyclable Epoxy System is specifically formulated for compression molding applications, such as for skis and snowboard manufacturing. Heat assisted curing.
    • Mix Ratio: 100:46 by weight

    Link to the TDS: TDS_POLARBEAR_bio(1)

    Make sure you use a digital scale. Mix by weight.

    Make sure you use gloves.

    Category:
    €104.00 "incl. VAT"

  • VDS rubber tape for skis and snowboard

    €0.75 – €84.00 "incl. VAT"     Select options

    VDS rubber tape for skis and snowboard

    VDS rubber Tape for skis and snowboard

    VDS rubber is used in between the edges and the laminates, and possibly sidewalls and laminate in order to decouple these materials with very different characteristics and improve durabiliy and life of the products. It purpose is to make sure that the layers stay together even when flexing and under tension.

    We offer VDS Rubber ready to use in 13mm, 25mm or 300mm wide. Black or Whitish.

    Quality VDS from Austria.

    With 300mm wide VDS you can cover your full board or ski with VDS.

    SKU: N/A Category:
    €0.75 – €84.00 "incl. VAT"

  • Ski or Snowboard Bamboo wood core 1800 x 320 x 12mm

    €78.00 "incl. VAT"     Add to cart

    Ski or Snowboard Bamboo wood core 1800 x 320 x 12mm

    Ski or Snowboard Bamboo wood core 1800 x 320 x 12mm

    New Bamboo, of finest Quality Natural Vertically laminated bamboo core for ski or snowboards, but can be used in general for any other product.

    Bamboo has natural spring like properties and this improves the ride handling.

    Size: 1800 x 320 x 12mm

    Laminated natural bamboo, density about 715kg/m3. Y modulus for simulation: 13000-15000N/mm2

    For tips and more info se below!

    Category:
    €78.00 "incl. VAT"

  • Union splitboard clips (full set)

    €60.00 "incl. VAT"     Add to cart

    Union splitboard clips (full set)

    The Union Clips and Hooks are simple and easy to assemble.

    These clips are a full set and come with all needed screws and assembly.

    Category:
    €60.00 "incl. VAT"

  • Sei Whale – Universal All-purpose Clear Biobased Epoxy – 1,5L FAST (1000g Resin, 500g Hardener)

    €54.00 "incl. VAT"     Add to cart

    Sei Whale – Universal All-purpose Clear Biobased Epoxy – 1,5L FAST (1000g Resin, 500g Hardener)
    MIX RATIO UPDATED!
    Epoxy resin for skis and snowboard.
    Before using, read instruction below!!!Replacement for Entropy CLR, very similar product all in all.
    Sei Whale is a clear, all-purpose, epoxy system with high UV resistance.Choose between various pot life times. Fast or Slow.

    Mix Ratio is 100:50g for Fast Hardener

    Mix Ratio is 100:46g for Slow Hardener

    In general, dont mix more then 250-300mL in one container, the mix can become too hot and will harden fast.

    Low smell, low toxicity! Great to work with and more environmental!

    TDS_Sei_Whale_Epoxy_System

    Fast Cure: mix: 100:50g. (14-17 min pot life)
    Slow Cure: mix 100:46g. (45-55min pot life.)
    Tack-free time for the fast version is below 5h and less than 8h for the slow one. 

    In case of heat curing (if possible use the CPM or Polar Bear version for compression heat curing), in general at 50C it will cure in 3h, at 60C it will cure in 80 minutes. I personally never went over 60C, for 80C pressing I used CPM/305 or polar bear resin.
    Make sure you use a digital scale. Mix by weight.

    Make sure you use gloves.

    Category:
    €54.00 "incl. VAT"

  • Polar Bear – Heated compression bio based epoxy 1,5L (1000g Epoxy, 460g Hardener)

    €54.00 "incl. VAT"     Add to cart

    Polar Bear – Heated compression bio based epoxy 1,5L (1000g Epoxy, 460g Hardener)
    Epoxy resin for skis and snowboard.

    Before using, read instruction below!!!

    Replacement for Entropy CPM/CPL, very similar product all in all.

    Pot life 25min @ 25C.

    The compression molding Polar Bear Biobased Epoxy System is designed for heat curing applications. Skis and snowboard manufacturing (also kite/wakeboards).

    Polar bear is a heated compression bio based epoxy.

    • Applications: Polar Bear Recyclable Epoxy System is specifically formulated for compression molding applications, such as for skis and snowboard manufacturing. Heat assisted curing.
    • Mix Ratio: 100:46 by weight

    Link to the TDS: TDS_POLARBEAR_bio(1)

    Make sure you use a digital scale. Mix by weight.

    Make sure you use gloves.

    Category:
    €54.00 "incl. VAT"

  • Sei Whale – Universal All-purpose Clear Biobased Epoxy – 1,5L SLOW (1000g Resin, 460g Hardener)

    €54.00 "incl. VAT"     Add to cart

    Sei Whale – Universal All-purpose Clear Biobased Epoxy – 1,5L SLOW (1000g Resin, 460g Hardener)
    MIX RATIO UPDATED!
    Epoxy resin for skis and snowboard.
    Before using, read instruction below!!!Replacement for Entropy CLR, very similar product all in all.

    Sei Whale is a clear, all-purpose, epoxy system with high UV resistance.

    Choose between various pot life times. Fast or Slow.

    Mix Ratio is 100:50g for Fast Hardener

    Mix Ratio is 100:46g for Slow Hardener

    In general, dont mix more then 250-300mL in one container, the mix can become too hot and will harden fast.

    Low smell, low toxicity! Great to work with and more environmental!

    TDS_Sei_Whale_Epoxy_System

    Fast Cure: mix: 100:500g. (14-17 min pot life)
    Slow Cure: mix 100:46g. (45-55min pot life.)
    Tack-free time for the fast version is below 5h and less than 8h for the slow one. 

    In case of heat curing (if possible use the CPM or Polar Bear version for compression heat curing), in general at 50C it will cure in 3h, at 60C it will cure in 80 minutes. I personally never went over 60C, for 80C pressing I used CPM/305 or polar bear resin.
    Make sure you use a digital scale. Mix by weight.

    Make sure you use gloves.

    Category:
    €54.00 "incl. VAT"

  • Carbon Fabric – Bi-axial (300g)

    €25.00 – €50.00 "incl. VAT"     Select options

    Carbon Fabric – Bi-axial (300g)

    Biaxial carbon fabric, 300gms total in +/-45 degree direction.

    ply +45 degree: 150gms

    ply -45 degree:150gms

    After laminating the white stitching should disappear.

    pr. 1m length. If more is ordered then it is rolled as one piece.

    Great product for light weight and hi-performing application. Combines well with UD carbon or with UD bcomp fabric.

    Please simulate always first!

    Remember that the bi-axial carbon +/-45 degrees, will give excellent torsion, however, it will contribute in stiffness both in length and width of your product.

    price pr. meter!

    SKU: N/A Category:
    €25.00 – €50.00 "incl. VAT"

  • Wakeboard/Kiteboard Paulownia wood core 1520x480x11mm or 14mm

    €40.00 – €45.00 "incl. VAT"     Select options

    Wakeboard/Kiteboard Paulownia wood core 1520x480x11mm or 14mm

    Wakeboard/Kiteboard Paulownia wood core 1520x480x11mm or 14mm

    This is a kiteboards and wakeboards paulownia wood core vertically laminated.

    Paulownia is the best woodcore for kiteboards or wakeboards. It offers high durability and very light weight. It is superior to Balsa in every way, also how well it works with epoxy.

    Tip: On how to implement and improve insert/binding area durability, please read here.

    WARNING: These board are light and fragile if shipped only 1pcs. Due to the fragile nature of these boards during shipping (we protect them well in double cardboard and Fragile marks), we recommend that minimum 2pcs are bought! If you buy 1pcs, you thereby accept responsibility for any transport damage. Boards are always fixable by glue or epoxy. Once the core is covered with composite it will be good as new.

    WE CAN NOT SHIP THIS ITEM TOGETHER WITH A SKI/SNB WOOD CORE DUE TO FREIGHT RESTRICTIONS BY THE GLS/DPD.

    SKU: N/A Category:
    €40.00 – €45.00 "incl. VAT"

  • Bcomp flax fabric (+/-45 Bi-axial)

    €22.50 – €44.00 "incl. VAT"     Select options

    Bcomp flax fabric (+/-45 Bi-axial)

    Natural flax from Bcomp.

    This material is 100% natural and excellent for all products. The stiffness is higher then glass fabric, but lower then carbon. Please see datasheet and try simulator to get an idea.

    +/-45 degree layers in total 350g (175g each).

    select width 640mm or 1280mm.

    pr. 1m length. If more is ordered then it is rolled as one piece.

    Another great property is that the material works well as a dampener. This means you can use the Biaxial and UD flax together or you can combine them with glass or carbon.

    For sumulation use:

    Density: 1350

    Y modulus: 58500

    Please see datasheet for more: t-flachs-5008-e

    Instructions: The flax fiber absorbs more resin.

    Pneumatic presses with ~5  bar is recommended to make good laminate with minimum excess resin.

    Vacuum press: follow this resin quantity recommendations: resin / (resin + fabric) = 60%
    Spread the resin well with a roll on a flat surface or pour the epoxy on to the fabric and then make a roll out of it. Then let it soak for some minutes. Much easier than try to smear it out.

     Tip: Use masking tape when cutting it for better result!

    SKU: N/A Category:
    €22.50 – €44.00 "incl. VAT"

  • Vacuum bagging kit

    €42.00 "incl. VAT"     Select options

    Vacuum bagging kit

    All you need for vacuum bagging a pair of skis or snowboard/kiteboard/wakeboard.

    The kit includes

    • 2m vacuum bag (915mm wide cylinder, 1830mm when cut open and 2m long)
    • 2m breather fabric (1520m wide)
    • 1 sealant tape
    • 4m peel ply
    SKU: N/A Categories: ,
    €42.00 "incl. VAT"

  • Vacuum bagging film

    €6.25 – €42.00 "incl. VAT"     Select options

    Vacuum bagging film

    Good quality vacuum bag for vacuum bagging composites. It is tube form. It is 915mm wide. It means you can cut it open and it is 1830mm long.

    elongation at break 400%

    max temperature 171 C

    color: translucent purple

    compatibility with most resin systems.

    SKU: N/A Category:
    €6.25 – €42.00 "incl. VAT"

  • Splitboard snowboard wood core Paulownia/Poplar

    €36.00 – €41.00 "incl. VAT"     Select options

    Splitboard snowboard wood core Paulownia/Poplar

    Splitboard snowboard wood core

    A lite and durable wood core made of Paulownia and Poplar mix, vertically laminated interchanging strips of 25mm. 10mm abs strip in the middle.

    For simulation use: 400kg/m3 densnity and 6800N/mm Y modulus.

    This is how we suggest to do insert area on these cores to avoid any pulling out of inserts, read here.

    Choose between several dimensions.

    SKU: N/A Category:
    €36.00 – €41.00 "incl. VAT"

  • (PU) Urethane Resin Smooth Cast 65D (sidewalls, insert/fin, underfoot area)

    €38.00 "incl. VAT"     Add to cart

    (PU) Urethane Resin Smooth Cast 65D (sidewalls, insert/fin, underfoot area)

    Polyurethane PU resin for sidewalls for skis and snowboards.

    Smooth cast 65D, Polyurethane resin for pouring sidewalls, tip/tail filler, for insert area or fin area, underfoot reinforcement or even for topcoat or similar. Gives nice smooth finish. Easy to bind to epoxy after just machining.

    Easy to work with, super durable and easy to machine. Bounding with epoxy needs no treatment.

    Urethane resin can easily be poured in a channel and hardens quickly. It gives very durable and hard to break sidewalls, easy to machine and binds easily to other layers without flaming/sanding.

    Categories: ,
    €38.00 "incl. VAT"

  • Splitboard snowboard Poplar/Beech core

    €36.00 "incl. VAT"     Add to cart

    Splitboard snowboard Poplar/Beech core

    Splitboard snowboard Poplar/Beech core

    A wood core made of Poplar reinforced with 2 Beech wood stringers thru the board insert area, vertically laminated interchanging strips of 25mm. 10mm abs strip in the middle.

    For simulation use approx.: Density of 430N/mm and Y-modulus of 9300

    This is how we suggest to do insert area on these cores to avoid any pulling out of inserts, read here.

    Below you can find a detailed drawing of the core.

    Category:
    €36.00 "incl. VAT"

  • Peel Ply fabric

    €4.75 – €33.00 "incl. VAT"     Select options

    Peel Ply fabric

    Peel ply with good performance for both epoxy and polyester resin. 500mm wide. It is from polyester.

    It leaves a textured surface once the resin cures, ready for next step.

    85g/m2

    0,127mm thick

    white

    black trackers

    temperature up to 190 C.

     

    SKU: N/A Category:
    €4.75 – €33.00 "incl. VAT"

  • Ash Ski wood core 1900x155x12.5mm

    €30.50 "incl. VAT"     Add to cart

    Ash Ski wood core 1900x155x12.5mm

    Ash Ski wood core

    Fantastic looks and performance from Ash wood cores made of european Ash wood, with single pieces wood from top to bottom. Ash is great wood for skis and a benefit also is that it is resistant to water, so you can make your skis without using any additional sidewalls.

    dimensions: 1900x155x12,5mm

    For a Snowboard you need 2 cores, and just join them with the epoxy resin or wood glue.

    Density about 700kg/m3, Y modulus about 13000

    PS: We do not ship any ski or snowboard wood cores together with kite or wake cores. The size is too big for transport.

    Category:
    €30.50 "incl. VAT"

  • Bcomp Bcore 200 – Ski wood core Balsa/Flax core 1900mm x 143mm x 14mm

    €30.00 "incl. VAT"     Add to cart

    Bcomp Bcore 200 – Ski wood core Balsa/Flax core 1900mm x 143mm x 14mm

    Ski wood core Balsa/Flax core Bcomp ski wood core

    This is the new ultra lite core from the Swiss bComp. Lighter than Paulownia about 15-20%.

    bCore 200 – light balsa/flax mix wood core:  1900mm x 143mm x 14mm.

    bCores™200_en(1)

    Tip: On how to implement and improve insert/binding area durability, please read here.

    For simulation use: density of 235kg/m3, Y-modulus of 2200 N/mm.

    The final core compared to Paulownia is usually some 10% thicker for same stiffness results. Please simulate.

    weight ca. 900 g ( +/- about 80 g )

    Price is pr piece!

    Category:
    €30.00 "incl. VAT"

  • IS 7200/7500 1.8mm Sintered Base BLACK (skis and snowboard base)

    €12.00 – €29.00 "incl. VAT"     Select options

    IS 7200/7500 1.8mm Sintered Base BLACK (skis and snowboard base)

    Sintered Base for skis and snowboard UHMW PE base ptex.

    1.8mm thick!

    Sintered thick quality base 100% recycled, similar to IS7200, for a most durable setup. Goes with 1.8mm step edges.  thickness is 1.8mm.

    For skis, that require minimum warping, use the 145mm wide base directly!

    price is pr. meter.

    Sanded and flamed on both sides.

    For more info, see below!

    SKU: N/A Category:
    €12.00 – €29.00 "incl. VAT"

  • ICP 8210 PA Polyamide/Nylon Topsheet CLEAR for Skis/Snowboard/Kiteboard (sublimation)

    €14.50 – €29.00 "incl. VAT"     Select options

    ICP 8210 PA Polyamide/Nylon Topsheet CLEAR for Skis/Snowboard/Kiteboard (sublimation)

    PA Topsheet for skis, snowboard or kiteboard, wakeboard.

    PA nylon topsheet – ICP 8210 is a 2 layer topheet, PA11 and PA12. ICP 8210 is tough, durable topsheet. It is harder then TPU/ABS and higher quality. Highest quality topsheet on the market.

    Multiple sizes and surface finishes available.

    Protective film overview and spec is in the bottom of the page.

    Protective foil should not be removed until your product is complete!

    PA topsheet gives more stiff ride and is a bit harder to machine, so make sure you have sharp tools.

    It comes in flamed or sanded and flamed finish on epoxy side. Outer side can be glossy, matte or with a certain structure (or brushed).

    Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

    SKU: N/A Category:
    €14.50 – €29.00 "incl. VAT"

  • Poplar/Beech stringers Snowboard wood core 1700x320x9mm

    €28.00 "incl. VAT"     Add to cart

    Poplar/Beech stringers Snowboard wood core 1700x320x9mm

    Poplar/Beech stringers Snowboard wood core

    Great wood core from Slovenia for snowboards. Poplar wood core with Beech stringers end to end thru the insert area.

    Poplar wood core with Beech stringers in the insert area (2pcs)

    1700 x 320 x 9mm

    laminated of 25mm wide strips.

    price is pr. piece.

    Category:
    €28.00 "incl. VAT"

  • Poplar/Paulownia lite Snowboard wood core 1700x320x9mm

    €27.50 "incl. VAT"     Add to cart

    Poplar/Paulownia lite Snowboard wood core 1700x320x9mm

    Poplar/Paulownia lite Snowboard wood core

    A lite version of popular snowboard wood core.

    Poplar wood core mix with Paulownia, vertically laminated.

    1700 x 320 x  9mm thick

    laminated of ~~25mm wide strips.

    Tip: On how to implement and improve insert/binding area durability, please read here.

    Price is pr. piece.

     

    Category:
    €27.50 "incl. VAT"

Showing 1–32 of 92 results