DIY Ski/Snowboard/Kiteboard/Wakeboard materials Shop
Showing 65–92 of 92 results
-
Cork material rubber sheet (0.8mm thick, 500mm wide) – 50cm length
€12.00 "incl. VAT" Add to cartCork material rubber sheet (0.8mm thick, 500mm wide) – 50cm length
Cork rubber material, ready to laminate. It is a rather durable and resiliant (an eco-friendlier) material that has amazing vibration and shock absorption capacities.
0,8mm thick. 500mm wide.
weight: 500mm x 500mm weighs about 200g.
Excellent to dampen the ride or to improve the durability or stiffness. Has various applications.
Applications: underfoot, see picture in the bottom. Tip and tail. Between edges and sidewalls for increased protection from blunt force impacts. To avoid rabbeting the core, you can put this material from edge to edge width wise. You can also go full width and length with it.
Material can be exposed on the side of the board/ski without water issues.
Price is pr. 0,5m. If you order more, it will be supplied in one piece.
€12.00 "incl. VAT" -
IS4400 1.2/320mm Extruded base Subtle ORANGE
€12.00 "incl. VAT" Add to cartIS4400 1.2/320mm Extruded base Subtle ORANGE
Extruded Base for skis and snowboard HDPE base ptex.
Isosport extruded 4400 base
color P 151 C
IS 4400 170 ORANGE S8GGV 1,20/320
quality base for ski and snowbaord.
Sanded and flamed one side and structured other side.
1.2mm thick
320mm wide
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€12.00 "incl. VAT" -
IS 4400 1.2/320mm Extruded base PINK
€12.00 "incl. VAT" Add to cartIS 4400 1.2/320mm Extruded base PINK
Extruded Base for skis and snowboard HDPE base ptex.
Isosport extruded 4400 quality base for ski and snowbaord.
1.2mm thick
320mm wide
Color p 212 C
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
sanded and flamed on one both sides! ( to give the best adhesion with epoxy)
€12.00 "incl. VAT" -
IS 4400 1.2/330mm Extruded ptex base BLACK
€12.00 "incl. VAT" Add to cartIS 4400 1.2/330mm Extruded ptex base BLACK
Extruded black ptex base for skis and snowboards.
Isosport 4400, highest quality extruded ptex base for ski and snowbaord.
Extruded base in Black color.
1.2mm thick
330mm wide
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
sanded and flamed both sides ( to give the best adhesion with epoxy).
€12.00 "incl. VAT" -
IS4800 1.2/300mm Extruded base Fluorescent ORANGE
€12.00 "incl. VAT" Add to cartIS4800 1.2/300mm Extruded base Fluorescent ORANGE
Isosport extruded 4800 quality base for ski and snowbaord.
Fluorescent Orange, slightly see thru.
Color P 804 C
1.2mm thick
300mm wide
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
sanded and flamed on one both sides! ( to give the best adhesion with epoxy)
€12.00 "incl. VAT" -
IS 4400 1.2/330mm Extruded base Fluorescent/Bright YELLOW
€11.00 "incl. VAT" Add to cartIS 4400 1.2/330mm Extruded base Fluorescent/Bright YELLOW
Isosport Fluorescent, 4400 hi quality extruded ptex base for ski and snowbaord. Much supperior to the 1600.
Extruded base in fluorescent yellow slightly see thru color.
1.2mm thick
330mm wide
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
sanded and flamed on one side only! ( to give the best adhesion with epoxy)
On how to turn it see here:
€11.00 "incl. VAT" -
IS 7500 0.9/160mm Sintered Base BLACK Skis
€10.00 "incl. VAT" Add to cartIS 7500 0.9/160mm Sintered Base BLACK Skis
IS 7500 BLACK 0,9/160mm
Top quality base IS7500!
sanded and flamed both sides.
sintered quality base that is suitable with 0.9mm edges.
For skis.
1m price, for orders of more then 1m, a single piece is supplied
€10.00 "incl. VAT" -
Glass Fabric Tri-axial (618gms/22oz, multiple width)
€8.00 – €10.00 "incl. VAT" Select optionsGlass Fabric Tri-axial (618gms/22oz, multiple width)
Triaxial, hi-performance woven glass fabric.
22oz or 620g/m2.
Width available is 360mm or 480mm.
0/+/-45 degree
0 ply: 283g
+/-45 ply: 144g
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€8.00 – €10.00 "incl. VAT" -
Sealant (black gummy) tape 15m roll
€9.00 "incl. VAT" Add to cartSealant (black gummy) tape 15m roll
Sealant tape.
size: 3mm x 12mm x 15m , black
Max temp 150 C (bag to tool) and 180C (bag to bag)
€9.00 "incl. VAT" -
Glass Fabric Bi-axial (300gms, 625mm wide)
€8.00 "incl. VAT" Add to cartGlass Fabric Bi-axial (300gms, 625mm wide)
Biaxial, hi-performance woven glass fabric.
300g/m2.
Width available is about 625mm
+/-45 degree
+/-45 ply: 150g/m2 each
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€8.00 "incl. VAT" -
ABS Sidewalls for Skis, snowboard and kiteboard
€7.50 – €8.00 "incl. VAT" Select optionsABS Sidewalls for Skis, snowboard and kiteboard
ABS Sidewalls for Skis, snowboard and kiteboard
Black, white, blue, bright orange, bright yellow or bright green ABS sidewall.
Sanded and flamed on 2 sides.
Modified thermoplastic Isosport ABS sidewalls. Extruded sheetmade of modified ABS(Acrylonitrile-Butadiene-Styrene), ID 1000 offers a good cost to performance ratio if characteristics like impactstrength, machinability and stiffness are necessary. Specification is below.
1750x13x10mm
1750x10x8mm
Sanded and flamed on 2 sides, ready for use.
Quantity needed: SNB:2 pcs, Ski pair: 4 pcs, Kite/wake board: 2-3 pcs.
€7.50 – €8.00 "incl. VAT" -
Glass Fabric Tri-axial (662gms/23oz, 300mm wide)
€5.00 "incl. VAT" Add to cartGlass Fabric Tri-axial (662gms/23oz, 300mm wide)
Ski, snowboard Triaxial glass fabric.
662gms Triaxial, hi-performance woven glass fabric.
23oz or 662g/m2
300mm wide
0/+/-45 degree
0 ply: 319g
+/-45 ply: 148g
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€5.00 "incl. VAT" -
Baltic Birch veneer
Sale! €3.95 "incl. VAT" Select optionsBaltic Birch veneer
Finest grade Baltic Birch veneer for skateboard and longboard decks. 1.5mm thick.
Local wood as durable as Maple veneer! Birch veneer is not less durable them Maple, this is just a hype. Use local!
Works well with our Epoxy resin.
Make sure when you make your ride, to seal the edges with epoxy/varnish (wood glue does not always works as well) to prevent water intrusion. This will make your ride last.
Quantity prices (excl. VAT):
50+ : 3.75 euro/pcs
100+: 3.55 euro/pcs
200+: 3.35 euro/pcs.
please contact us for order.
€3.95 "incl. VAT" -
Titanal sheet for skis and snowboard 0.4mm/310mm (pr.10cm)
€3.20 "incl. VAT" Add to cartTitanal sheet for skis and snowboard 0.4mm/310mm (pr.10cm)
Titanal sheet for skis and snowboard.
Thickness is 0.4mm, Width is 310mm.
Price is pr 10cm length, you get one piece when you order more.
Se Below for instructions on how to use!
€3.20 "incl. VAT" -
Skis and snowboard Steel edges (multiple sizes)
€2.90 – €3.00 "incl. VAT" Select optionsSkis and snowboard Steel edges (multiple sizes)
Skis and snowboard Steel edges. Steel metal edges, ready to be used. Sanded and primed.
For bending the edges we offer Edge bender Pro: https://www.junksupply.com/product/ski-snowboard-edge-bender-pro/
Choose between 0,9mm, 1.2mm, 1.5mm or 1.8mm step steel edges for base thickness 0,8mm-1.8mm respectively.
Top quality ski or snowboard steel edges from Austria. Sanded and primed, for epoxy use. Please use gloves at all time!
price is pr 1m! When ordering more then 1 m, we will send it in one piece, except on case you order also a wood core with 1.8mm or 1.5mm edges that can not be rolled to the dimensions accepted by GLS or DPD.
€2.90 – €3.00 "incl. VAT" -
2.5/310mm ABS Filler BLACK (pr. 10cm)
€2.85 "incl. VAT" Add to cart2.5/310mm ABS Filler BLACK (pr. 10cm)
Black ABS tip filler for skis and snowboard.
Maximum lenght is 120cm! If you need more, please add seperately in correct lenght.
Modified thermoplastic Isosport ABS insert or filler material for tip or tail.
310mm wide, 2.5mm thick.
Sanded and flamed, ready for use.
Price is pr 100mm or 10cm.
If more then one piece is ordered then it is delivered in one piece!
€2.85 "incl. VAT" -
2.5mm ABS Filler Subtle ORANGE 310mm wide (pr.10cm)
€2.65 "incl. VAT" Add to cart2.5mm ABS Filler Subtle ORANGE 310mm wide (pr.10cm)
price pr 10cm. Maximum length is 120cm
Bright Orange ABS tip/tail fill.
Modified thermoplastic Isosport ABS insert or filler material for tip or tail.
310mm wide, 2.5mm thick.
Sanded and flamed, ready for use.
If more ordered then it is delivered in one piece!
€2.65 "incl. VAT" -
2.5mm ABS Filler YELLOW 330mm wide (pr.10cm)
€2.65 "incl. VAT" Add to cart2.5mm ABS Filler YELLOW 330mm wide (pr.10cm)
price pr 10cm. Maximum length is 152cm
Bright Yellow ABS tip/tail fill.
Modified thermoplastic Isosport ABS insert or filler material for tip or tail.
330mm wide, 2.5mm thick.
Sanded and flamed, ready for use.
If more ordered then it is delivered in one piece!
€2.65 "incl. VAT" -
2.0/310mm ABS Filler BLACK (pr. 10cm)
€2.50 "incl. VAT" Read more2.0/310mm ABS Filler BLACK (pr. 10cm)
Black tip filler for skis and snowboard.Maximum lenght is 120cm! If you need more, please add seperately in correct lenght.Modified thermoplastic Isosport ABS insert or filler material for tip or tail.310mm wide, 2.0mm thick.
Sanded and flamed, ready for use.
Price is pr 100mm or 10cm.
If more then one piece is ordered then it might be delivered in one piece!
€2.50 "incl. VAT" -
Printable A4 non woven
€2.00 "incl. VAT" Add to cartPrintable A4 non woven
Suitable for laser printers and photocopiers, these non-woven lets you design and print out your own ratings plates, safety labels and product large designs, easily and economically, without the urgent need to order large print runs.
White
Laminates well
Size: 210 x 297 mm
Thickness: 0.30 mm
Areal weight: 40 g/m²
€2.00 "incl. VAT" -
Magnetic tape for insert 250mm long.
€2.00 "incl. VAT" Add to cartMagnetic tape for insert 250mm long.
This is a quality magnetic tape for use with our M6 inserts.
You can cut it in small pieces and attache it to the ‘hat’ or top of the inserts. This will help you find your insert during drilling. It is very helfull if your inserts are not visable due to carbon, graphics or similar.
12mm wide. 1mm thick.
Price is pr 250mm length.
€2.00 "incl. VAT" -
2.0/200mm ABS Filler WHITE (pr. 10cm)
€1.50 "incl. VAT" Add to cart2.0/200mm ABS Filler WHITE (pr. 10cm)
White tip filler.
Modified thermoplastic Isosport ABS insert or filler material for tip or tail.
200mm wide, 2.0mm thick.
Sanded and flamed, ready for use.
Price is pr 100mm or 10cm.
If more then one piece is ordered then it is delivered in one piece!
€1.50 "incl. VAT" -
2.5/140mm ABS Filler RED (pr 10cm.)
€1.50 "incl. VAT" Add to cart2.5/140mm ABS Filler RED (pr 10cm.)
Red-Orange ABS tip/tail fill.
Modified thermoplastic Isosport ABS insert or filler material for tip or tail.
140mm wide, 2.5mm thick.
Sanded and flamed, ready for use, both sides.
If more ordered then it is delivered in one piece!
€1.50 "incl. VAT" -
Adhesive fiberglass mesh 120mm wide
€1.00 "incl. VAT" Read moreAdhesive fiberglass mesh 120mm wide
Adhesive fiberglass mesh for attaching tip/tail spacer/filler material or for aiding to attaching inserts.
120mm wide,
1m long
€1.00 "incl. VAT" -
Glass fabric tape 50mm/130g
€1.00 "incl. VAT" Add to cartGlass fabric tape 50mm/130g
Glass fabric tape
225 g, width 30 mm
Ideal for reinforcing insert areas or similar. Please see here for example.
pr. 1m length. If more is ordered then it is rolled as one piece.
€1.00 "incl. VAT" -
M5 Splitboard clips Insert 3.1mm – caped
€0.75 "incl. VAT" Add to cartM5 Splitboard clips Insert 3.1mm – caped
Quality inserts produced in EU.
Stainless steel insert for splitboard clips.For those who dont wish to drill thru the spitboard, rather embed the inserts in the board during lamination.
The insert is M5 x 1 and is 3.1mm.
It is capped with a see thru cap.
0.8mm threading
Magnetic tape also available in store.
€0.75 "incl. VAT" -
Snowboard and Kiteboard M6 Insert – caped (ski/snb/kite/wake)
€0.65 – €0.75 "incl. VAT" Select optionsSnowboard and Kiteboard M6 Insert – caped (ski/snb/kite/wake)
Snowboard and Kiteboard M6 Inserts for DIY.
Quality snowboard and kiteboard inserts produced in EU. With cap, to prevent resin going in.
Snowboard inserts: Cr-Ni stainless steel A2 (AISI 304)
Kiteboard inserts: Nautic stainless steel A4 (AISI 316)Magnetic tape also available in store!
The insert is M6 x 1 and is 6mm-10.5mm high. If you need it to be magnetic, you can put a magnetic tape on top.
The Kite version is Nautic stainless steel A4 ( AISI 316 ) which does not ever rust.
€0.65 – €0.75 "incl. VAT" -
100% Alcohol Wipe
€0.25 "incl. VAT" Add to cart100% Alcohol Wipe
100% Isopropyl Alcohol Wipes for cleaning your sidewalls and tip/tail fill insert material prior flaming for proper bond, or for cleaning your equipment from epoxy.
Wipeing your sidewalls or filler materials with alcohol will greatly improve the bound to the epoxy, and decrease the chance of delamination later on!
price is pr.1 piece.
Read more: https://www.junksupply.com/flaming-and-sanding-sidewalls-or-the-tip-filler-ptex/
€0.25 "incl. VAT"
Showing 65–92 of 92 results