small
Showing 25–48 of 48 resultsSorted by popularity
-
Carbon / Graphite Sintered Base – BLACK (NHS Graphite)
€19.00 – €22.00 "incl. VAT for EU" Select options This product has multiple variants. The options may be chosen on the product pageCarbon / Graphite Sintered Base – BLACK (NHS Graphite)
Please read this first if used for skis: https://www.junksupply.com/sintered-base-handling-for-skis-and-snowboards/
IS NHS R2106 GRAPHITE sintered base, top quality base in terms of gliding and durability! Special additives are added to make this base quite fast!
Sanded and flamed on both sides.
1m price, for orders of more then 1m, a single piece is supplied
high carbon content and depending on the base special carbon types included. This carbon types and quantity makes the base better to grind in process and less greying over time. Making this base very durable and very long lasting.
Gliding ability is in generally on top level, similar to IS 7500 or better.
€19.00 – €22.00 "incl. VAT for EU" -
All-round Race Sintered Base 1.2mm – BLACK
€10.50 – €24.50 "incl. VAT for EU" Select options This product has multiple variants. The options may be chosen on the product pageAll-round Race Sintered Base 1.2mm – BLACK
Ski and snowboard Race Base.
Sintered ski- and snowboard running surfaces made of UHMW polyethylene modified with special flour and additives for better gliding at a wide range of conditions.
price is pr. meter.
Sanded and flamed on both sides.
before cutting, lay the base on a flat table for about 48h the base will start to relax. The heating tunnel is just a fast way to bring out the tension.
Storage: Room temperature with low temperature fluctuations. Humidity should not be too high. You can store it on the roll. If you recognize some wraping you can also try to wind it in other direction for storage.
€10.50 – €24.50 "incl. VAT for EU" -
Recycled Sintered Base – BLACK (multiple)
€16.00 – €23.00 "incl. VAT for EU" Select options This product has multiple variants. The options may be chosen on the product pageRecycled Sintered Base – BLACK (multiple)
Please read this first if used for skis: https://www.junksupply.com/sintered-base-handling-for-skis-and-snowboards/
Ptex, P-tex base or UHMW-PE base for skis and snowboard.
IS CB 7115X sintered base, in black.
100% made of recycled ptex and therefor naturally friendly alternative to other bases!
Top quality base in terms of gliding and durability. With added carbon.
1m price, for orders of more then 1m, a single piece is supplied
Gliding ability is in generally on top level.
Sanded and flamed on both sides.
For more info, see below!
€16.00 – €23.00 "incl. VAT for EU" -
Extruded base Fluorescent ORANGE 1.2/300mm (IS 4400)
€12.00 "incl. VAT for EU" Add to cartExtruded base Fluorescent ORANGE 1.2/300mm (IS 4400)
Isosport extruded 4800 quality base for ski and snowbaord.
Fluorescent Orange, slightly see thru.
Color P 804 C
1.2mm thick
300mm wide
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
sanded and flamed on one both sides! ( to give the best adhesion with epoxy)
€12.00 "incl. VAT for EU" -
Magnetic tape for insert 10x620mm
€2.00 "incl. VAT for EU" Add to cartMagnetic tape for insert 10x620mm
NEW thinner tape!
This is a quality magnetic tape for use with our M6 inserts.
You can cut it in small pieces and attache it to the ‘hat’ or top of the inserts. This will help you find your insert during drilling. It is very helfull if your inserts are not visable due to carbon, graphics or similar.
0.5mm thick.
Price is pr. piece 10x620mm
€2.00 "incl. VAT for EU" -
1.0mm or 1.2mm Sintered Ptex base YELLOW (multiple)
€15.00 – €16.50 "incl. VAT for EU" Select options This product has multiple variants. The options may be chosen on the product page1.0mm or 1.2mm Sintered Ptex base YELLOW (multiple)
Sintered Base for skis and snowboard UHMW PE base ptex.
IS 7200 115 GELB W 2G2GV 1,20/330
Color Yellow, P 109 C
Sintered quality base 1.0 or 1.2 thick 330mm wide.
Suitable for sublimation.
sanded and flamed both sides. Please check adhesion for this base first or reflame.
1m price, for orders of more then 1m, a single piece is supplied
€15.00 – €16.50 "incl. VAT for EU" -
1.2/320mm Sintered base PINK/PURPLE (IS 7200)
€16.50 "incl. VAT for EU" Add to cart1.2/320mm Sintered base PINK/PURPLE (IS 7200)
Sintered Base for skis and snowboard UHMW PE base ptex.
IS 7200 305 PINK 2G2GV 1,20/320
Color P 674 C
Sanded and flamed on both sides. Please check adhesion for this base first or reflame.
1m price, for orders of more then 1m, a single piece is supplied
€16.50 "incl. VAT for EU" -
Polyamide PA / Nylon Topsheet material WHITE (ICP 8100)
€20.50 – €23.00 "incl. VAT for EU" Select options This product has multiple variants. The options may be chosen on the product pagePolyamide PA / Nylon Topsheet material WHITE (ICP 8100)
White Polyamide PA / Nylon Topsheet for skis, snowboard or kiteboard, wakeboard etc.
Isosport ICP 8100 PA / polyamide / Nylon topsheet in white.
It offers all the qualities of ICP 8210 topsheet.
Suitable for sublimation / thermal transfer. Finest colors and durability, se info below.
PA nylon topsheet. Nylon is most tough and durable topsheet. It is harder then PBT topsheet and very scratch resistance, this is reflected in the price.
Back is flamed and impregnated with fleece.
PA topsheet gives more stiff ride and is a bit harder to machine, so make sure you have sharp tools.
Outer side can be glossy, matte or with a certain structure (or brushed).
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€20.50 – €23.00 "incl. VAT for EU" -
1.2/320mm Ptex Sintered Base GREEN (darker)
€16.50 "incl. VAT for EU" Add to cart1.2/320mm Ptex Sintered Base GREEN (darker)
ski and snowboard ptex base uhmw pe material.
IS 7200 621 GRÜN 2G2GV 1,20/320
sanded and flamed both sides
IS 7200 Isosport, sintered quality base. Base for ski and snowboard.
Color: P 362 C
Width is 320mm and thickness is 1.2mm
1m price, for orders of more then 1m, a single piece is supplied
€16.50 "incl. VAT for EU" -
Bcomp flax fabric – Unidirectional (150gms)
€7.50 – €19.50 "incl. VAT for EU" Select options This product has multiple variants. The options may be chosen on the product pageBcomp flax fabric – Unidirectional (150gms)
Natural flax from Bcomp.
150gms UD directional. multiple width.
This material is 100% natural and excellent for all products. The stiffness is higher then glass fabric, but lower then carbon. Please see datasheet and try simulator to get an idea.
For simulation use:
Density: 1350
Y modulus: 58500
Please see datasheet for more:
http://www.bcomp.ch/media/amplitex_5033.pdf
Another great property is that the material works well as a dampener. This means you can use the Biaxial and UD flax together or you can combine them with glass or carbon.
pr. 1m length. If more is ordered then it is rolled as one piece.
Note: This fabric will take more epoxy then glass or carbon fabric.
READ Instructions before use!
€7.50 – €19.50 "incl. VAT for EU" -
Sintered Ptex Base Light BLUE (multiple)
€11.00 – €27.50 "incl. VAT for EU" Select options This product has multiple variants. The options may be chosen on the product pageSintered Ptex Base Light BLUE (multiple)
Sintered Base for skis and snowboard UHMW PE base ptex.
IS 7200 507 BLAU 2G2GV
multiple sizes
color blue, p 7461 c
Suitable for sublimation.
1m price, for orders of more then 1m, a single piece is supplied
Sanded and flamed on both sides.
For more info se below!
€11.00 – €27.50 "incl. VAT for EU" -
Glass Fabric Bi-axial (300gms, 625mm wide)
€7.50 "incl. VAT for EU" Add to cartGlass Fabric Bi-axial (300gms, 625mm wide)
Biaxial, hi-performance woven glass fabric.
300g/m2.
Width available is about 625mm
thickness 0.15mm
+/-45 degree
+/-45 ply: 150g/m2 each
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€7.50 "incl. VAT for EU" -
Sintered ptex base GRAY 1.2/320mm
€16.50 "incl. VAT for EU" Add to cartSintered ptex base GRAY 1.2/320mm
Sintered base / ptex for skis and snowboard.
Please flame this base before use, or do a adhesion test first.
IS 7200 703 GRAU 2G2GV 1,20/320
Color P 7540 C
Tough sintered base for ski and snowboard.
Sanded and flamed both sides, however we do recommend to flame this material before layup if possible. For more tips and info read below!
It is 1.2mm thick, this should fit with 1.2mm edges with no problem. 320mm wide.
1m price, for orders of more then 1m, a single piece is supplied
€16.50 "incl. VAT for EU" -
(PU) Poly Urethane Resin Smooth Cast 65D
€38.00 "incl. VAT for EU" Add to cart(PU) Poly Urethane Resin Smooth Cast 65D
Polyurethane PU resin for sidewalls, inserts, fins or any aplication for skis and snowboards or kiteboard.
Smooth cast 65D, Polyurethane resin for pouring sidewalls, tip/tail filler, for insert area or fin area, underfoot reinforcement or even for topcoat or similar. Gives nice smooth finish. Easy to bind to epoxy after just machining.
Easy to work with, super durable and easy to machine. Bounding with epoxy needs no treatment.
Urethane resin can easily be poured in a channel and hardens quickly. It gives very durable and hard to break sidewalls, easy to machine and binds easily to other layers without flaming/sanding.
€38.00 "incl. VAT for EU" -
PBT Polyester Topsheet Material for Watersport – WHITE (WS100)
€13.00 "incl. VAT for EU" Select options This product has multiple variants. The options may be chosen on the product pagePBT Polyester Topsheet Material for Watersport – WHITE (WS100)
Coextruded PBT polyester white topsheet for kiteboards. Non impact modified, designed specifically for watersports, kitebaords and wakeboards. High quality topsheet for graphics sublimation/heat transfer.
0.5mm thick , 490mm wide.
This is not impact modified so if you use it for skis/snowboard, it will chip more easy.
This topsheet is fleece backed for improved bound to epoxy. A fluid epoxy will penetrate the fleece and bind well.
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
Graphics can be done with sublimation on the outside.
€13.00 "incl. VAT for EU" -
Sintered ptex Base LIME GREEN ski 1.2/130mm
€8.50 "incl. VAT for EU" Add to cartSintered ptex Base LIME GREEN ski 1.2/130mm
Sintered IS7200 ptex base for skis. Green color, fluorescent, slightly see thru.
Suitable for sublimation.
1.2/130mm
Sanded and flamed on both sides.
1m price, for orders of more then 1m, a single piece is supplied
€8.50 "incl. VAT for EU" -
Sintered Ptex base RED 1.2/330mm
€16.25 "incl. VAT for EU" Add to cartSintered Ptex base RED 1.2/330mm
Sintered Base for skis and snowboard UHMW PE base ptex.
IS 7200 329 ROT 2G2GV 1,20/330
Color Red, code P 179 C
Sintered quality base 1.2 thick 330mm wide.
Suitable for sublimation.
sanded and flamed both sides
1m price, for orders of more then 1m, a single piece is supplied
€16.25 "incl. VAT for EU" -
Sintered Ptex Base Bright GREEN 1.2/330mm
€16.50 "incl. VAT for EU" Add to cartSintered Ptex Base Bright GREEN 1.2/330mm
ski and snowboard ptex base uhmw pe material.
IS 7200 628 Green 2G2GV 1,20/320
Note: This base is older then 2 years, so you might need to flame it in order for the epoxy to stick to it well. See link below for instructions,
https://www.junksupply.com/flaming-and-sanding-sidewalls-or-the-tip-filler-ptex/
It is a Bright version of Green that matches the bright green sidewalls.
sanded and flamed both sides
IS 7200 Isosport, sintered quality base. Base for ski and snowboard.
Color: P 802 C
Width is 320mm and thickness is 1.2mm
1m price, for orders of more then 1m, a single piece is supplied
€16.50 "incl. VAT for EU" -
2.5mm ABS Filler Subtle ORANGE 310mm wide (pr.10cm)
€2.65 "incl. VAT for EU" Add to cart2.5mm ABS Filler Subtle ORANGE 310mm wide (pr.10cm)
price pr 10cm. Maximum length is 120cm
Bright Orange ABS tip/tail fill. P 164C color code. (It does not exactly match the orange sidewalls.)
Modified thermoplastic Isosport ABS insert or filler material for tip or tail.
330mm wide, 2.5mm thick.
Sanded and flamed, ready for use.
If more ordered then it is delivered in one piece!
€2.65 "incl. VAT for EU" -
Glass fabric (1000mm wide, multiple weight)
€9.00 "incl. VAT for EU" Select options This product has multiple variants. The options may be chosen on the product pageGlass fabric (1000mm wide, multiple weight)
Twill glass fabric also famous in making surfboards or sup boards.
Glass fabric 280 g/m² (twill) 100 cm
Glass fabric 200 g/m² (twill) 100 cm
Glass fabric 163 g/m² (twill) 100 cm
Glass fabric 50 g/m² (plain) 100 cm
Price is pr meter.
€9.00 "incl. VAT for EU" -
Sintered Clear ptex base 1.0mm
€15.75 "incl. VAT for EU" Add to cartSintered Clear ptex base 1.0mm
Can be used with 0.9mm step edges!
Tough sintered Clear base, highest quality base for ski and snowboard.
Ptex 2001 Sintered
Suitable for sublimation. Clear.
It is 1.0mm thick, this should fit with 0.9mm edges with no problem.
available width: 310mm.
1m price, for orders of more then 1m, a single piece is supplied
before cutting, lay the base on a flat table for about 48h the base will start to relax. The heating tunnel is just a fast way to bring out the tension.
Storage: Room temperature with low temperature fluctuations. Humidity should not be too high. You can store it on the roll. If you recognize some warping you can also try to wind it in other direction for storage.
€15.75 "incl. VAT for EU" -
IS 7200 1.2/330mm Sintered base BEIGE
€16.25 "incl. VAT for EU" Add to cartIS 7200 1.2/330mm Sintered base BEIGE
Sintered base / ptex UHMW PW for skis and snowboard.
Please flame this base before use, or do a adhesion test first, as it might have weakened over time.
7200 2G2GV W 812 1,2/330 BEIGE
Color P 7540 C
Tough sintered base for ski and snowboard. IS 7200.
It is 1.2mm thick, this should fit with 1.2mm edges with no problem.
1m price, for orders of more then 1m, a single piece is supplied
Se below for more tips and info!
€16.25 "incl. VAT for EU" -
Wake / Water-Ski Sintered UHMW-PE Grind base 0.6/480mm – CLEAR
€19.50 "incl. VAT for EU" Add to cartWake / Water-Ski Sintered UHMW-PE Grind base 0.6/480mm – CLEAR
Ultimate Sintered Wakeboard / Wakeskat or Water-Ski (uhmw) grind / ptex base.
Suitable for Powsurf as well.
Tougher, more scratch resistant, more durable hence it thinner and lighter clear base.
Great for gliding on obstacles.
It can of course also be used for snow applications, whereby the UHMW PE bases with a molecular weight of 8.7 mil are even better for snow applications.
0.6mm thick, 480mm wide, CLEAR!
Matte on outside and sanded and flamed on epoxy side.
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€19.50 "incl. VAT for EU" -
1.2/330mm Sintered base Dark BLUE (IS 7200)
€16.75 "incl. VAT for EU" Add to cart1.2/330mm Sintered base Dark BLUE (IS 7200)
Sintered Base for skis and snowboard UHMW PE base ptex. Dark Blue.
IS 7200 523 BLAU 2G2GV 1,20/330
Color P 281 C
Sanded and flamed on both sides.
1m price, for orders of more then 1m, a single piece is supplied
€16.75 "incl. VAT for EU"
Showing 25–48 of 48 resultsSorted by popularity