Shop

Showing 1–24 of 91 results

  • M6 inserts snowboard/kiteboard

    0.650.75 "incl. VAT"
    Select options

    M6 inserts snowboard/kiteboard

    Ski, Snowboard and Kiteboard,Wakeboard M6 binding Inserts for DIY.

    Quality snowboard and kiteboard inserts produced in EU. With cap, to prevent resin going in.

    Kiteboard inserts: Nautic stainless steel A4 (AISI 316)

    Magnetic tape also available in store!

    The insert is M6 x 1 and is 6mm-10.5mm high. If you need it to be magnetic, you can put a magnetic tape on top.

    Nautic stainless steel A4 ( AISI 316 ) which does not ever rust.

    SKU: N/A Category:
    0.650.75 "incl. VAT"
  • Steel edges for skis and snowboard

    2.903.00 "incl. VAT"
    Select options

    Steel edges for skis and snowboard

    Skis and snowboard Steel edges. Steel metal edges, ready to be used. Sanded and primed.

    For bending the edges we offer Edge bender Pro: https://www.junksupply.com/product/ski-snowboard-edge-bender-pro/

    Choose between 0,9mm, 1.2mm, 1.5mm or 1.8mm step steel edges for base thickness 0,8mm-1.8mm respectively.

    Top quality ski or snowboard steel edges from Austria. Sanded and primed, for epoxy use. Please use gloves at all time!

    price is pr 1m! When ordering more then 1 m, we will send it in one piece, except on case you order also a wood core with 1.8mm or 1.5mm edges that can not be rolled to the dimensions accepted by GLS or DPD.

    SKU: N/A Category:
    2.903.00 "incl. VAT"
  • VDS rubber tape for skis and snowboard

    0.6572.00 "incl. VAT"
    Select options

    VDS rubber tape for skis and snowboard

    VDS rubber Tape for skis and snowboard

    VDS rubber is used in between the edges and the laminates, and possibly sidewalls and laminate in order to decouple these materials with very different characteristics and improve durabiliy and life of the products. It purpose is to make sure that the layers stay together even when flexing and under tension.

    We offer VDS Rubber ready to use in 13mm, 25mm or 300mm wide. Black or Whitish.

    Quality VDS from Austria.

    With 300mm wide VDS you can cover your full board or ski with VDS.

    SKU: N/A Category:
    0.6572.00 "incl. VAT"
  • 1.2mm Sintered Base ptex BLACK

    9.7519.00 "incl. VAT"
    Select options

    1.2mm Sintered Base ptex BLACK

    Sintered Base ptex for skis and snowboard

    IS 7200-7500 Isosport, sintered quality base.

    Width is 125-350mm and thickness is 1.2mm.

    For skis, that require minimum warping, use the 140mm wide base.

    1m price, for orders of more then 1m, a single piece is supplied

    Sanded and flamed on both sides.

    For more info,  see below!

    SKU: N/A Category:
    9.7519.00 "incl. VAT"
  • ABS Sidewalls (Skis, snowboard, kiteboard)

    7.007.85 "incl. VAT"
    Select options

    ABS Sidewalls (Skis, snowboard, kiteboard)

    ABS Sidewalls for Skis, snowboard and kiteboard

    Black, white, blue,  bright orange, bright yellow or bright green ABS sidewall.

    Modified thermoplastic Isosport ABS sidewalls. Extruded sheetmade of modified ABS(Acrylonitrile-Butadiene-Styrene), ID 1000 offers a good cost to performance ratio if characteristics like impactstrength, machinability and stiffness are necessary. Specification is below.

    1750x13x10mm

    1750x10x8mm

    Sanded and flamed on 2 sides, ready for use.

    Quantity needed: SNB:2 pcs, Ski pair: 4 pcs, Kite/wake board: 2-3 pcs.

    SKU: N/A Category:
    7.007.85 "incl. VAT"
  • UD lightweight carbon fabric 130gms

    2.50340.00 "incl. VAT"
    Select options

    UD lightweight carbon fabric 130gms

    Uni directional – UD – 0 degrees carbon tape fabric.

    weight is 130gms. 50-300mm wide

    Carbon Heat Set Woven Unidirectionals are produced with unidirectional carbon fibres in the warp and very lightweight thermoplastic fibres in the weft. The thermoplastic fibres are fused to create a stable fabric that is very stable and easy to handle and cut. These fabrics are excellent for wet lay up and wet preg applications.

    pr. 1m length. If more is ordered then it is rolled as one piece.

    Fantastic fabric for improving your rides flex/stiffness, giving it extra pop or even making it more light weight.

    This fabric can be combined with our Bi-axial carbon fabric to get a triaxial performance fabric.

    Tip: Use glue to stick the carbon to the core before layup to make it stay where you desire.

    SKU: N/A Category:
    2.50340.00 "incl. VAT"
  • Wakeboard and Powsurf grind base ptex CLEAR (IS6000)

    13.5016.00 "incl. VAT"
    Select options

    Wakeboard and Powsurf grind base ptex CLEAR (IS6000)

    Wakeboard and powsurf grind base / ptex base.

    IS 6000 base, also called wakeboard grind base, is a base very close to a sintered bases in quality terms.

    Ideal for wakeboard grind base or a lite weight ski or snowboard/splitboard or powsurf. 0.9mm step edges fit for the 0.9mm base.

    Base is sanded and flamed on both sides. Usually inside is the epoxy side on bases, however Isosport had issues with this base so please check on a small piece of base if inside sticks well.

    Se below Detailed description for more info!

    Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

    13.5016.00 "incl. VAT"
  • TPU/ABS Clear Topsheet material (ICP 2115)

    9.0014.00 "incl. VAT"
    Select options

    TPU/ABS Clear Topsheet material (ICP 2115)

    TPU/ABS clear topsheet material for skis, snowboard or kiteboard, wakeboard.

    Isosport 2115, 2 layer, Clear TPU/ABS topsheet.

    Suitable for some solvant ink printers from inside on ABS layer. Please check first.

    Gives a bit softer ride and is less durable then PA topsheet, but still great durability.

    Epoxy Side: Inside of the roll, unless it has protective film, please check.

    Protective foil should not be removed until your product is complete!

    Corona treated on the epoxy side (this looks like a very smooth glossy side).

    PS: Please before using check if your topsheet has protective film on the outside. We try as often as we can to get topsheet with protective film but some batches do not have it. In this case you can tape the topside of your topsheet with clear application tape (ebay) or contact paper for protection of needed.

    Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

     

    SKU: N/A Category:
    9.0014.00 "incl. VAT"
  • 100% Alcohol Wipe

    0.30 "incl. VAT"
    Add to cart

    100% Alcohol Wipe

    ON STOCK FROM 22.NOVEMBER 2023

    100% Isopropyl Alcohol Wipes for cleaning your sidewalls and tip/tail fill insert material prior flaming for proper bond, or for cleaning your equipment from epoxy.

    Wipeing your sidewalls or filler materials with alcohol will greatly improve the bound to the epoxy, and decrease the chance of delamination later on!

    price is pr.1 piece.

    Read more: https://www.junksupply.com/flaming-and-sanding-sidewalls-or-the-tip-filler-ptex/

    0.30 "incl. VAT"
  • Polyamide/Nylon Clear Topsheet material (ICP 8210)

    12.0029.00 "incl. VAT"
    Select options

    Polyamide/Nylon Clear Topsheet material (ICP 8210)

    Clear topsheet material for Skis/Snowboard/Kiteboard PA Polyamide/Nylon.

    PA nylon topsheet – ICP 8210 is a 2 layer topheet, PA11 and PA12. ICP 8210 is tough, durable topsheet. It is harder then TPU/ABS and higher quality. Highest quality topsheet on the market.

    Suitable for sublimation / thermal transfer.

    Multiple sizes and surface finishes available.

    Protective film overview and spec is in the bottom of the page.

    Protective foil should not be removed until your product is complete!

    PA topsheet gives more stiff ride and is a bit harder to machine, so make sure you have sharp tools.

    It comes in flamed or sanded and flamed finish on epoxy side. Outer side can be glossy, matte or with a certain structure (or brushed).

    Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

    SKU: N/A Category:
    12.0029.00 "incl. VAT"
  • 1.2mm Ptex Sintered Base CLEAR (IS 7500)

    9.0016.75 "incl. VAT"
    Select options

    1.2mm Ptex Sintered Base CLEAR (IS 7500)

    Clear sintered ptex base for skis and snowboard. Sintered Base for skis and snowboard UHMW PE base ptex.

    Tough sintered highest quality base for ski and snowboard.

    IS7500 from Isosport

    Suitable for sublimation. Clear.

    It is 1.2mm thick, this should fit with 1.2mm edges with no problem.

    available width: 145mm – 350mm.

    1m price, for orders of more then 1m, a single piece is supplied

    For more info, see below!

    SKU: N/A Category:
    9.0016.75 "incl. VAT"
  • PBT Polyester Topsheet material WHITE (ICP 4140/4160)

    12.5015.50 "incl. VAT"
    Select options

    PBT Polyester Topsheet material WHITE (ICP 4140/4160)

    ICP 4160 Isosport PBT Polyester Topsheet material WHITE

    Coextruded impact modified, durable PBT (polyester) white topsheet for all categories. High quality topsheet for graphics sublimation/heat transfer.

    This topsheet is fleece backed for improved bound to epoxy. A fluid epoxy will penetrate the fleece and bind well.

    Graphics can be done with sublimation on the outside.

    Read more on sublimation here: https://www.junksupply.com/sublimation-heat-transfer-of-graphics-on-plastics/

    More durable and hard then TPU topsheet.

    Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

    SKU: N/A Category:
    12.5015.50 "incl. VAT"
  • M5 Splitboard clips Insert 3.1mm – caped

    0.75 "incl. VAT"
    Add to cart

    M5 Splitboard clips Insert 3.1mm – caped

    Quality inserts produced in EU.

    Stainless steel insert for splitboard clips.For those who dont wish to drill thru the spitboard, rather embed the inserts in the board during lamination.

    The insert is M5 x 1 and is 3.1mm.

    It is capped with a see thru cap.

    0.8mm threading

    Magnetic tape also available in store.

    0.75 "incl. VAT"
  • Titanal sheet for skis and snowboard

    3.00 "incl. VAT"
    Add to cart

    Titanal sheet for skis and snowboard

    Titanal sheet for skis and snowboard.

    Thickness is 0.4mm, Width is 310mm.

    Price is pr 10cm length, you get one piece when you order more.

    Se Below for instructions on how to use!

    3.00 "incl. VAT"
  • Glass Fabric Triaxial (618gms/22oz/620mm)

    9.50 "incl. VAT"
    Add to cart

    Glass Fabric Triaxial (618gms/22oz/620mm)

    Triaxial, hi-performance woven glass fabric.

    22oz or 620g/m2.

    620mm wide.

    0/+/-45 degree

    thickness: 0.45mm

    0 ply: 283g

    +/-45 ply: 144g

    Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

     

    Category:
    9.50 "incl. VAT"
  • 2.5/310mm ABS Filler BLACK (pr. 10cm)

    2.85 "incl. VAT"
    Add to cart

    2.5/310mm ABS Filler BLACK (pr. 10cm)

    Black ABS tip filler for skis and snowboard.

    Maximum lenght is 120cm! If you need more, please add seperately in correct lenght.

    Modified thermoplastic Isosport ABS insert or filler material for tip or tail.

    310mm wide, 2.5mm thick.

    Sanded and flamed, ready for use.

    Price is pr 100mm or 10cm.

     If more then one piece is ordered then it is delivered in one piece!

    2.85 "incl. VAT"
  • 1.8mm Sintered Base BLACK (IS 7500)

    12.0029.00 "incl. VAT"
    Select options

    1.8mm Sintered Base BLACK (IS 7500)

    Sintered Base for skis and snowboard UHMW PE base ptex.

    1.8mm thick!

    Sintered thick quality base 100% recycled, similar to IS7200, for a most durable setup. Goes with 1.8mm step edges.  thickness is 1.8mm.

    For skis, that require minimum warping, use the 145mm wide base directly!

    price is pr. meter.

    Sanded and flamed on both sides.

    For more info, see below!

    SKU: N/A Category:
    12.0029.00 "incl. VAT"
  • Extruded ptex base BLACK 1.0-1.2mm (IS 4400 or similar)

    10.5012.00 "incl. VAT"
    Select options

    Extruded ptex base BLACK 1.0-1.2mm (IS 4400 or similar)

    Extruded black ptex base for skis and snowboards.

    Isosport 4400, highest quality extruded ptex base for ski and snowbaord.

    Extruded base in Black color.

    1.2mm thick or 1.0mm thick

    330mm wide

    Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

    sanded and flamed both sides ( to give the best adhesion with epoxy).

    SKU: N/A Category:
    10.5012.00 "incl. VAT"
  • Bcomp flax fabric (+/-45 Bi-axial)

    25.0050.00 "incl. VAT"
    Select options

    Bcomp flax fabric (+/-45 Bi-axial)

    Natural flax from Bcomp.

    This material is 100% natural and excellent for all products. The stiffness is higher then glass fabric, but lower then carbon. Please see datasheet and try simulator to get an idea.

    +/-45 degree layers in total 350g (175g each).

    thickness 0.5mm

    select width 640mm or 1280mm.

    pr. 1m length. If more is ordered then it is rolled as one piece.

    Another great property is that the material works well as a dampener. This means you can use the Biaxial and UD flax together or you can combine them with glass or carbon.

    For sumulation use:

    Density: 1350

    Y modulus: 58500

    Please see datasheet for more: t-flachs-5008-e

    Instructions: The flax fiber absorbs more resin.

    Pneumatic presses with ~5  bar is recommended to make good laminate with minimum excess resin.

    Vacuum press: follow this resin quantity recommendations: resin / (resin + fabric) = 60%
    Spread the resin well with a roll on a flat surface or pour the epoxy on to the fabric and then make a roll out of it. Then let it soak for some minutes. Much easier than try to smear it out.

     Tip: Use masking tape when cutting it for better result!

    SKU: N/A Category:
    25.0050.00 "incl. VAT"
  • Bcomp ‘AmpliTex Fusion’ – Unidirectional

    3.5021.00 "incl. VAT"
    Select options

    Bcomp ‘AmpliTex Fusion’ – Unidirectional

    Flax and carbon mix fabric, best of both worlds.

    ampliTex flax-carbon UD fabrics, non-crimp, in multiple widths and weights.

    170-225gms, 25-350mm wide.

    price is pr. 1m length. If more is ordered then it is rolled as one piece.

    Technical datasheet: t-flachs-5027-e

    Flax parameters: Density: 1350, Y modulus: 58500

    Carbon parameters: Density: 1700 Y modulus: 235000

    See guide on how to find averaged parameters for simulation

     

    SKU: N/A Categories: ,
    3.5021.00 "incl. VAT"
  • Bcomp flax fabric – Unidirectional (300gms, 350mm wide)

    15.00 "incl. VAT"
    Add to cart

    Bcomp flax fabric – Unidirectional (300gms, 350mm wide)

    Natural flax from Bcomp.

    UD directional 300gms, 350mm wide. Thickness 0.3mm

    Technical datasheet: t-flachs-5009-e

    This material is 100% natural and excellent for all products. The stiffness is higher then glass fabric, but lower then carbon. Please see datasheet and try simulator to get an idea.

    pr. 1m length. If more is ordered then it is rolled as one piece.

    For simulation use:

    Density: 1350

    Y modulus: 58500

    Please see datasheet for more:

    http://bcomp.ch/files/e_tds_ud_5009_5025.pdf

    Another great property is that the material works well as a dampener. This means you can use the Biaxial and UD flax together or you can combine them with glass or carbon.

    Note: This fabric will take  more epoxy then glass or carbon fabric.

    Instructions: The flax fiber absorbs more resin.

    Pneumatic presses with ~5  bar is recommended to make good laminate with minimum excess resin.

    Vacuum press: follow this resin quantity recommendations: resin / (resin + fabric) = 60%
    Spread the resin well with a roll on a flat surface or pour the epoxy on to the fabric and then make a roll out of it. Then let it soak for some minutes. Much easier than try to smear it out.

     

    Tip: Use masking tape when cutting it for better result!

     

    Category:
    15.00 "incl. VAT"
  • Glass Fabric Tri-axial (662gms/23oz, 300mm wide)

    4.00 "incl. VAT"
    Add to cart

    Glass Fabric Tri-axial (662gms/23oz, 300mm wide)

    Ski, snowboard Triaxial glass fabric.

    662gms Triaxial, hi-performance woven glass fabric.

    23oz or 662g/m2

    300mm wide

    thickness 0.65mm

    0/+/-45 degree

    0 ply: 319g

    +/-45 ply: 148g

    Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

     

    Category:
    4.00 "incl. VAT"
  • 1.5mm Sintered base BLACK (IS 7500)

    11.0023.50 "incl. VAT"
    Select options

    1.5mm Sintered base BLACK (IS 7500)

    Sintered Base for skis and snowboard UHMW PE base ptex.

    THICK Sintered ptex base 1.5/350 Black IS 7500 2G2GV 1,5/350mm and 1.5/145mm

    Sintered thick quality base for durable setup. Goes with 1.5mm step edges. Width is 350mm, thickness is 1.5mm.

    For skis, that require minimum warping, use the 140mm wide base.

    1m price, for orders of more then 1m, a single piece is supplied

    Sanded and flamed on both sides.

    For more info, see below!

    SKU: N/A Category:
    11.0023.50 "incl. VAT"
  • Baltic Birch veneer

    Sale! 3.95 "incl. VAT"
    Select options

    Baltic Birch veneer

    Finest grade Baltic Birch veneer for skateboard and longboard decks. 1.5mm thick.

    Local wood as durable as Maple veneer! Birch veneer is not less durable them Maple, this is just a hype. Use local!

    Works well with our Epoxy resin.

    Make sure when you make your ride, to seal the edges with epoxy/varnish (wood glue does not always works as well) to prevent water intrusion. This will make your ride last.

     

    Quantity prices (excl. VAT):

    50+ : 3.75 euro/pcs

    100+: 3.55 euro/pcs

    200+: 3.35 euro/pcs.

    please contact us for order.

    SKU: 100 Category:
    3.95 "incl. VAT"

Showing 1–24 of 91 results