PBT Polyester Topsheet material WHITE

€12.00 – €14.75 "incl. VAT"

ICP 4160 Isosport PBT Polyester Topsheet material WHITE

Coextruded impact modified, durable PBT (polyester) white topsheet for all categories. High quality topsheet for graphics sublimation/heat transfer.

This topsheet is fleece backed for improved bound to epoxy. A fluid epoxy will penetrate the fleece and bind well.

Graphics can be done with sublimation on the outside.

Read more on sublimation here: https://www.junksupply.com/sublimation-heat-transfer-of-graphics-on-plastics/

More durable and hard then TPU topsheet.

Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

SKU: N/A Category:

Description

PBT Polyester Topsheet material WHITE

ICP 4160 PBT toopshet impact modified.

Coextruded Polyester pbt topsheet, impact modified, durable PBT topsheet.

Thick (0.4-0.45mm) durable topsheet or bottom sheet suitable for sublimation graphics!

High-gloss or mat, two-layer polyester cap top sheet with optimized property profile in terms of sublimability, color brilliance, scratch resistance and white intrinsic color.

PS: This topsheet is for sublimation and has no protective tape. It can be applied afterwords as application film.

Sublimation up to 180 degrees for 1-2 min. Please allow adequate cooling time.

One side is glossy (the outer side) and the epoxy side is treated and layered with thin fabric to give best possible adhesion to epoxy.

price pr.meter.

PS: This topsheet does not have a protective film.

 

iso4160topsheet

 

 

Additional information

Weight 0.35 kg
Size

PBT 0.5/320mm wide Glossy, PBT 0.4/490mm Matte, PBT 0.4/490mm Glossy

Related products

  • Wakeboard and Powsurf grind base ptex CLEAR

    €13.50 – €15.95 "incl. VAT"     Select options

    Wakeboard and Powsurf grind base ptex CLEAR

    Wakeboard and powsurf grind base / ptex base.

    Price is pr.1m. If more is ordered, single piece is delivered in 1 roll.

    IS 6000 base, also called wakeboard grind base, is a base very close to a sintered bases in quality terms.

    Ideal for wakeboard grind base or a lite weight ski or snowboard/splitboard or powsurf. 0.9mm step edges fit for the 0.9mm base.

    Make sure you use outer side of the roll as epoxy side if both are sanded, or if one is sanded use that one!

    Se below Detailed description for more info!

    Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

    SKU: N/A Categories: , ,
    €13.50 – €15.95 "incl. VAT"

  • Polyamide/Nylon Clear Topsheet material ICP 8210

    €14.50 – €29.00 "incl. VAT"     Select options

    Polyamide/Nylon Clear Topsheet material ICP 8210

    Clear topsheet material for Skis/Snowboard/Kiteboard PA Polyamide/Nylon.

    PA nylon topsheet – ICP 8210 is a 2 layer topheet, PA11 and PA12. ICP 8210 is tough, durable topsheet. It is harder then TPU/ABS and higher quality. Highest quality topsheet on the market.

    Multiple sizes and surface finishes available.

    Protective film overview and spec is in the bottom of the page.

    Protective foil should not be removed until your product is complete!

    PA topsheet gives more stiff ride and is a bit harder to machine, so make sure you have sharp tools.

    It comes in flamed or sanded and flamed finish on epoxy side. Outer side can be glossy, matte or with a certain structure (or brushed).

    Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

    SKU: N/A Category:
    €14.50 – €29.00 "incl. VAT"

  • PBT Polyester White topsheet material for watersport

    €13.00 "incl. VAT"     Select options

    PBT Polyester White topsheet material for watersport

    Coextruded PBT polyester white topsheet for kiteboards. Non impact modified,  designed specifically for watersports, kitebaords and wakeboards. High quality topsheet for graphics sublimation/heat transfer.

    0.5mm thick , 490mm wide.

    This is not impact modified so if you use it for skis/snowboard, it will chip more easy.

    This topsheet is fleece backed for improved bound to epoxy. A fluid epoxy will penetrate the fleece and bind well.

    Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.

    Graphics can be done with sublimation on the outside.

    SKU: N/A Category:
    €13.00 "incl. VAT"