Shop – Ski and Snowboard Materials
Showing 25–48 of 95 results
-
1.5mm Sintered base BLACK (multiple width)
€11.00 – €23.50 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product page1.5mm Sintered base BLACK (multiple width)
Please read this first if used for skis: https://www.junksupply.com/sintered-base-handling-for-skis-and-snowboards/
Sintered Base for skis and snowboard UHMW PE base ptex.
THICK Sintered ptex base 1.5/350 Black IS 7500 2G2GV 1,5/350mm and 1.5/145mm
Sintered thick quality base for durable setup. Goes with 1.5mm step edges. Width is 350mm, thickness is 1.5mm.
For skis, that require minimum warping, use the 140mm wide base.
1m price, for orders of more then 1m, a single piece is supplied
Sanded and flamed on both sides.
For more info, see below!
€11.00 – €23.50 "incl. VAT" -
2.5mm ABS Filler YELLOW 330mm wide (pr.10cm)
€2.65 "incl. VAT" Add to cart2.5mm ABS Filler YELLOW 330mm wide (pr.10cm)
price pr 10cm. Maximum length is 120cm
Bright Yellow ABS tip/tail fill. P 388C color code. Fluorescent. Matches the sidewalls.
Modified thermoplastic Isosport ABS insert or filler material for tip or tail.
300mm wide, 2.5mm thick.
Sanded and flamed, ready for use.
If more ordered then it is delivered in one piece!
€2.65 "incl. VAT" -
Baltic Birch veneer
Sale! €3.95 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageBaltic Birch veneer
Finest grade Baltic Birch veneer for skateboard and longboard decks. 1.5mm thick.
Local wood as durable as Maple veneer! Birch veneer is not less durable them Maple, this is just a hype. Use local!
Works well with our Epoxy resin.
Make sure when you make your ride, to seal the edges with epoxy/varnish (wood glue does not always works as well) to prevent water intrusion. This will make your ride last.
Quantity prices (excl. VAT):
50+ : 3.75 euro/pcs
100+: 3.55 euro/pcs
200+: 3.35 euro/pcs.
please contact us for order.
€3.95 "incl. VAT" -
Glass Fabric – Tri-axial (750gms/26oz – 625mm wide)
€9.50 "incl. VAT" Add to cartGlass Fabric – Tri-axial (750gms/26oz – 625mm wide)
Ski, snowboard and kiteboard Triaxial glass fabric.
Hi-performance woven glass fabric.
26oz or 750g/m2.
thickness: 0.6mm
Width available is about 625mm
0/+/-45 degree
0 ply: 283g/m2
+/-45 ply: 236g/m2
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€9.50 "incl. VAT" -
All-round Race Sintered Base 1.2mm – BLACK (NHS R)
€21.50 – €23.50 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageAll-round Race Sintered Base 1.2mm – BLACK (NHS R)
This is new series IS NHS R3428 race base from Isosport, highest quality all-round race (ptex) base.
IS NHS R3428 1.2/300-330mm
Sintered ski- and snowboard running surfaces made of UHMW polyethylene modified with special fluor and additives for better gliding at a wide range of conditions.
Width is 330mm and thickness is 1.2mm.
price is pr. meter.
Sanded and flamed on both sides.
before cutting, lay the base on a flat table for about 48h the base will start to relax. The heating tunnel is just a fast way to bring out the tension.
Storage: Room temperature with low temperature fluctuations. Humidity should not be too high. You can store it on the roll. If you recognize some wraping you can also try to wind it in other direction for storage.
€21.50 – €23.50 "incl. VAT" -
1.2/330mm Ptex Sintered base WHITE (IS 7200)
€16.50 "incl. VAT" Add to cart1.2/330mm Ptex Sintered base WHITE (IS 7200)
Please read this first if used for skis: https://www.junksupply.com/sintered-base-handling-for-skis-and-snowboards/
Sintered Base for skis and snowboard UHMW PE base ptex.
Suitable for sublimation.
This is some of the highest quality and toughest fast sintered ptex base, UHMW.
IS 7200 isospeed WHITE.
Width is 330mm and thickness is 1.2mm. Price pr.m.
1m price, for orders of more then 1m, a single piece is supplied
Base is sanded and flamed on both sides for best binding properties.
€16.50 "incl. VAT" -
Poplar/Beech Snowboard wood core 1700x320x9mm
€28.50 "incl. VAT" Add to cartPoplar/Beech Snowboard wood core 1700x320x9mm
Poplar/Beech stringers Snowboard wood core
Great wood core from Slovenia for snowboards. Poplar wood core with Beech stringers end to end thru the insert area.
Poplar wood core with Beech stringers in the insert area (2pcs)
1700 x 320 x 9mm
single piece wood planks!
laminated of 25mm wide strips.
price is pr. piece.
€28.50 "incl. VAT" -
Recycled Sintered Base – BLACK (multiple)
€16.00 – €23.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageRecycled Sintered Base – BLACK (multiple)
Please read this first if used for skis: https://www.junksupply.com/sintered-base-handling-for-skis-and-snowboards/
Ptex, P-tex base or UHMW-PE base for skis and snowboard.
IS CB 7115X sintered base, in black.
100% made of recycled ptex and therefor naturally friendly alternative to other bases!
Top quality base in terms of gliding and durability. With added carbon.
1m price, for orders of more then 1m, a single piece is supplied
Gliding ability is in generally on top level.
Sanded and flamed on both sides.
For more info, see below!
€16.00 – €23.00 "incl. VAT" -
Carbon / Graphite Sintered Base – BLACK (NHS Graphite)(multiple)
€19.00 – €21.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageCarbon / Graphite Sintered Base – BLACK (NHS Graphite)(multiple)
Please read this first if used for skis: https://www.junksupply.com/sintered-base-handling-for-skis-and-snowboards/
IS NHS GRAPHITE sintered base, top quality base in terms of gliding and durability!
IS NHS GRAPHITE 2G2GV Black
Snaded and flamed on both sides.
1m price, for orders of more then 1m, a single piece is supplied
high carbon content and depending on the base special carbon types included. This carbon types and quantity makes the base better to grind in process and less greying over time. Making this base very durable and very long lasting.
Gliding ability is in generally on top level, similar to IS 7500 or better.
Sanded and flamed on both sides.
before cutting, lay the base on a flat table for about 48h the base will start to relax. The heating tunnel is just a fast way to bring out the tension.
Storage: Room temperature with low temperature fluctuations. Humidity should not be too high. You can store it on the roll. If you recognize some wraping you can also try to wind it in other direction for storage.
€19.00 – €21.00 "incl. VAT" -
Extruded base Fluorescent ORANGE 1.2/300mm (IS 4400)
€12.00 "incl. VAT" Add to cartExtruded base Fluorescent ORANGE 1.2/300mm (IS 4400)
Isosport extruded 4800 quality base for ski and snowbaord.
Fluorescent Orange, slightly see thru.
Color P 804 C
1.2mm thick
300mm wide
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
sanded and flamed on one both sides! ( to give the best adhesion with epoxy)
€12.00 "incl. VAT" -
Poplar/Beech Ski wood core 1900x160x13mm
€24.50 "incl. VAT" Add to cart -
2.5/200mm ABS Filler BLACK(pr. 10cm)
€1.50 "incl. VAT" Add to cart2.5/200mm ABS Filler BLACK(pr. 10cm)
Black abs tip filler.Modified thermoplastic Isosport ABS insert or filler material for tip or tail.
200mm wide, 2.5mm thick.
Sanded and flamed, ready for use.
Price is pr 100mm or 10cm.
If more then one piece is ordered then it is delivered in one piece!
€1.50 "incl. VAT" -
Magnetic tape for insert 10x620mm
€2.00 "incl. VAT" Add to cartMagnetic tape for insert 10x620mm
NEW thinner tape!
This is a quality magnetic tape for use with our M6 inserts.
You can cut it in small pieces and attache it to the ‘hat’ or top of the inserts. This will help you find your insert during drilling. It is very helfull if your inserts are not visable due to carbon, graphics or similar.
0.5mm thick.
Price is pr. piece 10x620mm
€2.00 "incl. VAT" -
1.0mm or 1.2mm Sintered Ptex base YELLOW (multiple)
€15.00 – €16.50 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product page1.0mm or 1.2mm Sintered Ptex base YELLOW (multiple)
Sintered Base for skis and snowboard UHMW PE base ptex.
IS 7200 115 GELB W 2G2GV 1,20/330
Color Yellow, P 109 C
Sintered quality base 1.0 or 1.2 thick 330mm wide.
Suitable for sublimation.
sanded and flamed both sides. Please check adhesion for this base first or reflame.
1m price, for orders of more then 1m, a single piece is supplied
€15.00 – €16.50 "incl. VAT" -
1.2/320mm Sintered base PINK/PURPLE (IS 7200)
€16.50 "incl. VAT" Add to cart1.2/320mm Sintered base PINK/PURPLE (IS 7200)
Sintered Base for skis and snowboard UHMW PE base ptex.
IS 7200 305 PINK 2G2GV 1,20/320
Color P 674 C
Sanded and flamed on both sides. Please check adhesion for this base first or reflame.
1m price, for orders of more then 1m, a single piece is supplied
€16.50 "incl. VAT" -
Ash Ski wood core 1900x155x12.5mm
€30.50 "incl. VAT" Add to cartAsh Ski wood core 1900x155x12.5mm
Ash Ski wood core
Fantastic looks and performance from Ash wood cores made of european Ash wood, with single pieces wood from top to bottom. Ash is great wood for skis and a benefit also is that it is resistant to water, so you can make your skis without using any additional sidewalls.
dimensions: 1900x155x12,5mm
single piece wood planks!
For a Snowboard you need 2 cores, and just join them with the epoxy resin or wood glue.
Density about 700kg/m3, Y modulus about 13000
PS: We do not ship any ski or snowboard wood cores together with kite or wake cores. The size is too big for transport.
€30.50 "incl. VAT" -
1.2/320mm Ptex Sintered Base GREEN (darker)
€16.50 "incl. VAT" Add to cart1.2/320mm Ptex Sintered Base GREEN (darker)
ski and snowboard ptex base uhmw pe material.
IS 7200 621 GRÜN 2G2GV 1,20/320
sanded and flamed both sides
IS 7200 Isosport, sintered quality base. Base for ski and snowboard.
Color: P 362 C
Width is 320mm and thickness is 1.2mm
1m price, for orders of more then 1m, a single piece is supplied
€16.50 "incl. VAT" -
Bcomp flax fabric – Unidirectional (150gms)
€7.50 – €19.50 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageBcomp flax fabric – Unidirectional (150gms)
Natural flax from Bcomp.
150gms UD directional. multiple width.
This material is 100% natural and excellent for all products. The stiffness is higher then glass fabric, but lower then carbon. Please see datasheet and try simulator to get an idea.
For simulation use:
Density: 1350
Y modulus: 58500
Please see datasheet for more:
http://www.bcomp.ch/media/amplitex_5033.pdf
Another great property is that the material works well as a dampener. This means you can use the Biaxial and UD flax together or you can combine them with glass or carbon.
pr. 1m length. If more is ordered then it is rolled as one piece.
Note: This fabric will take more epoxy then glass or carbon fabric.
Instructions: The flax fiber absorbs more resin.
Pneumatic presses with ~5 bar is recommended to make good laminate with minimum excess resin.
Vacuum press: follow this resin quantity recommendations: resin / (resin + fabric) = 60%
Spread the resin well with a roll on a flat surface or pour the epoxy on to the fabric and then make a roll out of it. Then let it soak for some minutes. Much easier than try to smear it out.Tip: Use masking tape when cutting it for better result!
€7.50 – €19.50 "incl. VAT" -
Paulownia Ski wood core 1900 x 145 x 14 mm
€27.00 "incl. VAT" Add to cartPaulownia Ski wood core 1900 x 145 x 14 mm
Paulownia Ski wood core
Super light wood 280-300 kg/m3! Great properties for light skis/Snowboards.
Super easy to work with and machine, its ideal wood core for light construction.
Ski wood core made of Paulownia 20mm strips vertically laminated. Highest quality.
1900 x 145 x 14 mm
single piece wood planks!
For a Snowboard you need 2 cores, and just join them with the epoxy resin or wood glue.
Tip: On how to implement and improve insert/binding area durability, please read here.
€27.00 "incl. VAT" -
Glass fabric tape 30mm/225g
€1.00 "incl. VAT" Add to cartGlass fabric tape 30mm/225g
Glass fabric tape
225 g, width 30 mm
Ideal for reinforcing insert areas or similar. Please see here for example.
pr. 1m length. If more is ordered then it is rolled as one piece.
€1.00 "incl. VAT" -
Polyamide PA / Nylon Topsheet material WHITE (ICP 8100)
€20.50 – €23.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pagePolyamide PA / Nylon Topsheet material WHITE (ICP 8100)
White Polyamide PA / Nylon Topsheet for skis, snowboard or kiteboard, wakeboard etc.
Isosport ICP 8100 PA / polyamide / Nylon topsheet in white.
It offers all the qualities of ICP 8210 topsheet.
Suitable for sublimation / thermal transfer. Finest colors and durability, se info below.
PA nylon topsheet. Nylon is most tough and durable topsheet. It is harder then PBT topsheet and very scratch resistance, this is reflected in the price.
Back is flamed and impregnated with fleece.
PA topsheet gives more stiff ride and is a bit harder to machine, so make sure you have sharp tools.
Outer side can be glossy, matte or with a certain structure (or brushed).
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€20.50 – €23.00 "incl. VAT" -
Bamboo wood core 1800 x 320 x 12mm
€78.00 "incl. VAT" Add to cartBamboo wood core 1800 x 320 x 12mm
Ski or Snowboard Bamboo wood core 1800 x 320 x 12mm
New Bamboo, of finest Quality Natural Vertically laminated bamboo core for ski or snowboards, but can be used in general for any other product.
Bamboo has natural spring like properties and this improves the ride handling.
Size: 1800 x 320 x 12mm
Laminated natural bamboo, density about 715kg/m3. Y modulus for simulation: 13000-15000N/mm2
For tips and more info se below!
€78.00 "incl. VAT" -
Sei Whale Universal All-purpose Epoxy SLOW
€54.00 – €105.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageSei Whale Universal All-purpose Epoxy SLOW
MIX RATIO UPDATED!Epoxy resin for skis and snowboard.Before using, read instruction below!!!
Sei Whale is a clear, all-purpose, epoxy system with high UV resistance.Mix Ratio is 100:46g for Slow HardenerIn general, dont mix more then 250-300mL in one container, the mix can become too hot and will harden fast.
Low smell, low toxicity! Great to work with and more environmental!
Slow Cure: mix 100:46g. (45-55min pot life.)Tack-free time for the fast version is below 5h and less than 8h for the slow one. In general keep min. 24h in press.
In case of heat curing (if possible use the CPM or Polar Bear version for compression heat curing), in general at 50C it will cure in 3h, at 60C it will cure in 80 minutes. I personally never went over 60C, for 80C pressing I used CPM/305 or polar bear resin.Make sure you use a digital scale. Mix by weight.Make sure you use gloves.
€54.00 – €105.00 "incl. VAT" -
Wakeboard/Kiteboard Paulownia wood core
€40.00 "incl. VAT" Add to cartWakeboard/Kiteboard Paulownia wood core
Wakeboard/Kiteboard Paulownia wood core 1520x480x12mm
This is a kiteboards and wakeboards paulownia wood core vertically laminated.
Paulownia is the best woodcore for kiteboards or wakeboards. It offers high durability and very light weight. It is superior to Balsa in every way, also how well it works with epoxy.
Tip: On how to implement and improve insert/binding area durability, please read here.
WARNING: These board are light and fragile if shipped only 1pcs. Due to the fragile nature of these boards during shipping (we protect them well in double cardboard and Fragile marks), we recommend that minimum 2pcs are bought! If you buy 1pcs, you thereby accept responsibility for any transport damage. Boards are always fixable by glue or epoxy. Once the core is covered with composite it will be good as new.
WE CAN NOT SHIP THIS ITEM TOGETHER WITH A SKI/SNB WOOD CORE DUE TO FREIGHT RESTRICTIONS BY THE GLS/DPD.
€40.00 "incl. VAT"
Showing 25–48 of 95 results