Shop
Showing 49–72 of 91 results
-
Sei Whale Universal All-purpose Epoxy 1,5L SLOW
€54.00 "incl. VAT" Add to cartSei Whale Universal All-purpose Epoxy 1,5L SLOW
MIX RATIO UPDATED!Epoxy resin for skis and snowboard.Before using, read instruction below!!!Replacement for Entropy CLR, very similar product all in all.
Sei Whale is a clear, all-purpose, epoxy system with high UV resistance.Choose between various pot life times. Fast or Slow.Mix Ratio is 100:50g for Fast Hardener
Mix Ratio is 100:46g for Slow Hardener
In general, dont mix more then 250-300mL in one container, the mix can become too hot and will harden fast.
Low smell, low toxicity! Great to work with and more environmental!
Fast Cure: mix: 100:500g. (14-17 min pot life)Slow Cure: mix 100:46g. (45-55min pot life.)Tack-free time for the fast version is below 5h and less than 8h for the slow one.
In case of heat curing (if possible use the CPM or Polar Bear version for compression heat curing), in general at 50C it will cure in 3h, at 60C it will cure in 80 minutes. I personally never went over 60C, for 80C pressing I used CPM/305 or polar bear resin.Make sure you use a digital scale. Mix by weight.Make sure you use gloves.
€54.00 "incl. VAT" -
Sintered ptex base GRAY 1.2/330mm
€16.25 "incl. VAT" Add to cartSintered ptex base GRAY 1.2/330mm
Sintered base / ptex for skis and snowboard.
Please flame this base before use, or do a adhesion test first.
IS 7200 703 GRAU 2G2GV 1,20/300
Color P 7540 C
Tough sintered base for ski and snowboard. IS 7200.
Sanded and flamed both sides, however we do recommend to flame this material before layup if possible. For more tips and info read below!
It is 1.2mm thick, this should fit with 1.2mm edges with no problem. 330mm wide.
1m price, for orders of more then 1m, a single piece is supplied
€16.25 "incl. VAT" -
IS 7500 0.9/160mm Sintered Base BLACK Skis
€10.00 "incl. VAT" Add to cartIS 7500 0.9/160mm Sintered Base BLACK Skis
IS 7500 BLACK 0,9/160mm
Top quality base IS7500!
sanded and flamed both sides.
sintered quality base that is suitable with 0.9mm edges.
For skis.
1m price, for orders of more then 1m, a single piece is supplied
€10.00 "incl. VAT" -
Sintered Ptex Base BLUE 1.2/330mm
€16.25 "incl. VAT" Add to cartSintered Ptex Base BLUE 1.2/330mm
Sintered Base for skis and snowboard UHMW PE base ptex.
IS 7200 507 BLAU 2G2GV 1,20/330
color blue, p 7461 c
Suitable for sublimation.
Width is 330mm and thickness is 1.2mm.
1m price, for orders of more then 1m, a single piece is supplied
Sanded and flamed on both sides.
For more info se below!
€16.25 "incl. VAT" -
Polyamide/Nylon White Topsheet material
€21.50 – €25.00 "incl. VAT" Select optionsPolyamide/Nylon White Topsheet material
White PA polyamide/nylon Topsheet for skis, snowboard or kiteboard, wakeboard.
Isosport ICP 8100 PA / polyamide / Nylon topsheet in white. For sublimation. Finest colors and durability!
PA nylon topsheet. Nylon is most tough and durable topsheet. It is harder then PBT topsheet and very scratch resistance, this is reflected in the price.
Back is flamed and impregnated with fleece.
PA topsheet gives more stiff ride and is a bit harder to machine, so make sure you have sharp tools.
Outer side can be glossy, matte or with a certain structure (or brushed).
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€21.50 – €25.00 "incl. VAT" -
Glass Fabric Bi-axial (300gms, 625mm wide)
€7.50 "incl. VAT" Add to cartGlass Fabric Bi-axial (300gms, 625mm wide)
Biaxial, hi-performance woven glass fabric.
300g/m2.
Width available is about 625mm
+/-45 degree
+/-45 ply: 150g/m2 each
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€7.50 "incl. VAT" -
Carbon Fabric – Bi-axial (300g)
€25.00 – €50.00 "incl. VAT" Select optionsCarbon Fabric – Bi-axial (300g)
Biaxial carbon fabric, 300gms total in +/-45 degree direction.
ply +45 degree: 150gms
ply -45 degree:150gms
After laminating the white stitching should disappear.
pr. 1m length. If more is ordered then it is rolled as one piece.
Great product for light weight and hi-performing application. Combines well with UD carbon or with UD bcomp fabric.
Please simulate always first!
Remember that the bi-axial carbon +/-45 degrees, will give excellent torsion, however, it will contribute in stiffness both in length and width of your product.
price pr. meter!
€25.00 – €50.00 "incl. VAT" -
Poplar/Paulownia Snowboard wood core 1700x320x9mm
€27.50 "incl. VAT" Add to cartPoplar/Paulownia Snowboard wood core 1700x320x9mm
Poplar/Paulownia lite Snowboard wood core
A lite version of popular snowboard wood core.
Poplar wood core mix with Paulownia, vertically laminated.
1700 x 320 x 9mm thick
single piece wood planks!
laminated of ~~25mm wide strips.
Tip: On how to implement and improve insert/binding area durability, please read here.
Price is pr. piece.
€27.50 "incl. VAT" -
(PU) Poly Urethane Resin Smooth Cast 65D
€38.00 "incl. VAT" Add to cart(PU) Poly Urethane Resin Smooth Cast 65D
Polyurethane PU resin for sidewalls, inserts, fins or any aplication for skis and snowboards or kiteboard.
Smooth cast 65D, Polyurethane resin for pouring sidewalls, tip/tail filler, for insert area or fin area, underfoot reinforcement or even for topcoat or similar. Gives nice smooth finish. Easy to bind to epoxy after just machining.
Easy to work with, super durable and easy to machine. Bounding with epoxy needs no treatment.
Urethane resin can easily be poured in a channel and hardens quickly. It gives very durable and hard to break sidewalls, easy to machine and binds easily to other layers without flaming/sanding.
€38.00 "incl. VAT" -
Sealant (black gummy) tape 15m roll
€9.00 "incl. VAT" Add to cartSealant (black gummy) tape 15m roll
Sealant tape.
size: 3mm x 12mm x 15m , black
Max temp 150 C (bag to tool) and 180C (bag to bag)
€9.00 "incl. VAT" -
Bcomp Bcore 200 ski wood core 1900mm x 143mm x 14mm
€30.00 "incl. VAT" Add to cartBcomp Bcore 200 ski wood core 1900mm x 143mm x 14mm
Ski wood core Balsa/Flax core Bcomp ski wood core
This is the new ultra lite core from the Swiss bComp. Lighter than Paulownia about 15-20%.
bCore 200 – light balsa/flax mix wood core: 1900mm x 143mm x 14mm.
Tip: On how to implement and improve insert/binding area durability, please read here.
For simulation use: density of 235kg/m3, Y-modulus of 2200 N/mm.
The final core compared to Paulownia is usually some 10% thicker for same stiffness results. Please simulate.
weight ca. 900 g ( +/- about 80 g )
Price is pr piece!
€30.00 "incl. VAT" -
Vacuum bagging film
€6.25 – €42.00 "incl. VAT" Select optionsVacuum bagging film
Good quality vacuum bag for vacuum bagging composites. It is tube form. It is 915mm wide. It means you can cut it open and it is 1830mm long.
elongation at break 400%
max temperature 171 C
color: translucent purple
compatibility with most resin systems.
€6.25 – €42.00 "incl. VAT" -
Breather and Absorber fabric
€6.25 – €26.00 "incl. VAT" Select optionsBreather and Absorber fabric
non woven polyester breather and absorber with extremely good drape and stretch characteristics. 153 g/m2
max temp is 205 C
width is 1520mm
price pr 1m length.
€6.25 – €26.00 "incl. VAT" -
Ski DIY package kit (Poplar/Beech woodcore)
€250.00 – €310.00 "incl. VAT" Select optionsSki DIY package kit (Poplar/Beech woodcore)
DIY ski standard package kit for making your own skis.
All you need to build own skis!
Read first how to work with the materials: https://www.junksupply.com/how-to-work-with-our-materials/
Item contains: 2 pcs Poplar with 2 beech stringers ski wood core, base + topsheet, fabric, 1,2L epoxy, 8m of 25mm VDS, 8m steel edges, 4 sidewalls + tip/tail fill
Fabric options:
- 25oz Glass fabric. Add UD stringers separately if you need extra pop.
- Biax carbon + UD Bcomp flax: 2m carbon biax 300gms fabric for top and bottom and 2m 300gms UD bcomp fabric for top. You get premium ultra-responsive performance ski that is damped with bcomp fabric. Best of both worlds..
- Biax Bcomp Flax + UD carbon: 2m Bcomp biax 350gms flax fabric for top and bottom and 2m 130gms UD carbon fabric for top and bottom. You get a responsive ski, with great characteristics between the carbon one and glass one. It is also very much environmentally friendly.
We recommend you add one 100% alcohol wipe pr. sidewall, at least for cleaning and improved adhesion, read here.
€250.00 – €310.00 "incl. VAT" -
Adhesive fiberglass mesh 120mm wide
€1.00 "incl. VAT" Read moreAdhesive fiberglass mesh 120mm wide
Adhesive fiberglass mesh for attaching tip/tail spacer/filler material or for aiding to attaching inserts.
120mm wide,
1m long
€1.00 "incl. VAT" -
IS 4400 1.2/320mm Extruded base PINK
€12.00 "incl. VAT" Add to cartIS 4400 1.2/320mm Extruded base PINK
Extruded Base for skis and snowboard HDPE base ptex.
Isosport extruded 4400 quality base for ski and snowbaord.
1.2mm thick
320mm wide
Color p 212 C
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
sanded and flamed on one both sides! ( to give the best adhesion with epoxy)
€12.00 "incl. VAT" -
1.2/320mm Extruded base Subtle ORANGE
€12.00 "incl. VAT" Add to cart1.2/320mm Extruded base Subtle ORANGE
Extruded Base for skis and snowboard HDPE base ptex.
Isosport extruded 4400 base
color P 151 C
IS 4400 170 ORANGE S8GGV 1,20/320
quality base for ski and snowbaord.
Sanded and flamed one side and structured other side.
1.2mm thick
320mm wide
Price is pr. 1 meter. If more is ordered, then it is rolled and sent as 1pcs.
€12.00 "incl. VAT" -
Vacuum bagging kit
€42.00 "incl. VAT" Select optionsVacuum bagging kit
All you need for vacuum bagging a pair of skis or snowboard/kiteboard/wakeboard.
The kit includes
- 2m vacuum bag (915mm wide cylinder, 1830mm when cut open and 2m long)
- 2m breather fabric (1520m wide)
- 1 sealant tape
- 4m peel ply
€42.00 "incl. VAT" -
Sintered ptex Base LIME GREEN ski 1.2/130mm
€8.50 "incl. VAT" Add to cartSintered ptex Base LIME GREEN ski 1.2/130mm
Sintered IS7200 ptex base for skis. Green color, fluorescent, slightly see thru.
Suitable for sublimation.
1.2/130mm
Sanded and flamed on both sides.
1m price, for orders of more then 1m, a single piece is supplied
€8.50 "incl. VAT" -
Cork material rubber sheet
€12.00 "incl. VAT" Add to cartCork material rubber sheet
Cork rubber material, ready to laminate. It is a rather durable and resiliant (an eco-friendlier) material that has amazing vibration and shock absorption capacities.
0,8mm thick. 500mm wide.
weight: 500mm x 500mm weighs about 200g.
Excellent to dampen the ride or to improve the durability or stiffness. Has various applications.
Applications: underfoot, see picture in the bottom. Tip and tail. Between edges and sidewalls for increased protection from blunt force impacts. To avoid rabbeting the core, you can put this material from edge to edge width wise. You can also go full width and length with it.
Material can be exposed on the side of the board/ski without water issues.
Price is pr. 0,5m. If you order more, it will be supplied in one piece.
€12.00 "incl. VAT" -
Peel Ply fabric
€4.75 – €33.00 "incl. VAT" Select optionsPeel Ply fabric
Peel ply with good performance for both epoxy and polyester resin. 500mm wide. It is from polyester.
It leaves a textured surface once the resin cures, ready for next step.
85g/m2
0,127mm thick
white
black trackers
temperature up to 190 C.
€4.75 – €33.00 "incl. VAT" -
Sei Whale Universal All-purpose Epoxy 3L SLOW
€104.00 "incl. VAT" Add to cartSei Whale Universal All-purpose Epoxy 3L SLOW
MIX RATIO UPDATED!
Skis and snowboard epoxy resin.
Before using, read instruction below!!!
Replacement for Entropy CLR, very similar product all in all.
Sei Whale is a clear, all-purpose, epoxy system with high UV resistance.
Choose between various pot life times. Fast or Slow.
Mix Ratio is 100:46g for Fast Hardener
Mix Ratio is 100:50g for Slow Hardener
In general, dont mix more then 250-300mL in one container, the mix can become too hot and will harden fast.
Low smell, low toxicity! Great to work with and more environmental!
Fast Cure: mix: 100:50g. (14-17 min pot life)Slow Cure: mix 100:46g. (45-55min pot life.)Tack-free time for the fast version is below 5h and less than 8h for the slow one.
In case of heat curing (if possible use the CPM or Polar Bear version for compression heat curing), in general at 50C it will cure in 3h, at 60C it will cure in 80 minutes. I personally never went over 60C, for 80C pressing I used CPM/305 or polar bear resin.Make sure you use a digital scale. Mix by weight.Make sure you use gloves.
€104.00 "incl. VAT" -
Sintered Ptex Base Bright GREEN 1.2/330mm
€16.50 "incl. VAT" Add to cartSintered Ptex Base Bright GREEN 1.2/330mm
ski and snowboard ptex base uhmw pe material.
IS 7200 628 Green 2G2GV 1,20/320
Note: This base is older then 2 years, so you might need to flame it in order for the epoxy to stick to it well. See link below for instructions,
https://www.junksupply.com/flaming-and-sanding-sidewalls-or-the-tip-filler-ptex/
It is a Bright version of Green that matches the bright green sidewalls.
sanded and flamed both sides
IS 7200 Isosport, sintered quality base. Base for ski and snowboard.
Color: P 802 C
Width is 320mm and thickness is 1.2mm
1m price, for orders of more then 1m, a single piece is supplied
€16.50 "incl. VAT" -
Sintered Ptex base RED 1.2/330mm
€16.25 "incl. VAT" Add to cartSintered Ptex base RED 1.2/330mm
Sintered Base for skis and snowboard UHMW PE base ptex.
IS 7200 329 ROT 2G2GV 1,20/330
Color Red, code P 179 C
Sintered quality base 1.2 thick 330mm wide.
Suitable for sublimation.
sanded and flamed both sides
1m price, for orders of more then 1m, a single piece is supplied
€16.25 "incl. VAT"
Showing 49–72 of 91 results