Adhesive fiberglass mesh 120mm wide
€1.00 "incl. VAT"
Adhesive fiberglass mesh for attaching tip/tail spacer/filler material or for aiding to attaching inserts.
120mm wide,
1m long
Related products
-
Magnetic tape for insert 10x620mm
€2.00 "incl. VAT" Add to cartMagnetic tape for insert 10x620mm
NEW thinner tape!
This is a quality magnetic tape for use with our M6 inserts.
You can cut it in small pieces and attache it to the ‘hat’ or top of the inserts. This will help you find your insert during drilling. It is very helfull if your inserts are not visable due to carbon, graphics or similar.
0.5mm thick.
Price is pr. piece 10x620mm
Category: Edges, inserts and VDS€2.00 "incl. VAT" -
M6 inserts snowboard/kiteboard
€0.65 – €0.75 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageM6 inserts snowboard/kiteboard
Ski, Snowboard and Kiteboard,Wakeboard M6 binding Inserts for DIY.
Quality snowboard and kiteboard inserts produced in EU. With cap, to prevent resin going in.
Kiteboard inserts: Nautic stainless steel A4 (AISI 316)
Magnetic tape also available in store!
The insert is M6 x 1 and is 6mm-10.5mm high. If you need it to be magnetic, you can put a magnetic tape on top.
Nautic stainless steel A4 ( AISI 316 ) which does not ever rust.
SKU: N/A Category: Edges, inserts and VDS€0.65 – €0.75 "incl. VAT" -
Steel edges for skis and snowboard
€2.70 – €3.00 "incl. VAT" Select options This product has multiple variants. The options may be chosen on the product pageSteel edges for skis and snowboard
Skis and snowboard Steel edges. Steel metal edges, ready to be used. Sanded and primed.
For bending the edges we offer Edge bender Pro: https://www.junksupply.com/product/ski-snowboard-edge-bender-pro/
Read this before you apply: http://www.skibuilders.com/phpBB2/viewtopic.php?p=53321&hilit=cold+press#p53321
Choose between 0,9mm, 1.2mm, 1.5mm or 1.8mm step steel edges for base thickness 0,8mm-1.8mm respectively.
Top quality ski or snowboard steel edges from Austria. Sanded and primed, for epoxy use. Please use gloves at all time!
price is pr 1m! When ordering more then 1 m, we will send it in one piece, except on case you order also a wood core with 1.8mm or 1.5mm edges that can not be rolled to the dimensions accepted by GLS or DPD.
SKU: N/A Category: Edges, inserts and VDS€2.70 – €3.00 "incl. VAT"