1.8mm Sintered Base BLACK (IS 7500)

12.0029.00 "incl. VAT"

Sintered Base for skis and snowboard UHMW PE base ptex.

1.8mm thick!

Sintered thick quality base 100% recycled, similar to IS7200, for a most durable setup. Goes with 1.8mm step edges.  thickness is 1.8mm.

For skis, that require minimum warping, use the 145mm wide base directly!

price is pr. meter.

Sanded and flamed on both sides.

For more info, see below!

SKU: N/A Category:


This is some of the highest quality and toughest fast sintered base, UHMW. Ultra hight molecular weight polyethyline.

Width is 350mm or 145mm and thickness is 1.8mm. Price pr.m.

Base is sanded and flamed on both sides for best binding properties with epoxy


Sintered base handling for skis and snowboards

before cutting, lay the base on a flat table for about 48h the base will start to relax. The heating tunnel is just a fast way to bring out the tension.

Storage: Room temperature with low temperature fluctuations. Humidity should not be too high. You can store it on the roll. If you recognize some wraping you can also try to wind it in other direction for storage.

Some manufacturers call this ptex or p-tex sintered base for ski and snowboard.

base 7200

Additional information

Weight 0.65 kg

1.8mm thick 145mm wide IS7500, 1.8mm thick 350mm wide IS7200 Recycled 100%, 1.8 thick 336mm wide Blue (Patone 7461 C)