Description
Wakeboard and powsurf grind base / ptex base.
IS crosslinked base IS 6000 TD Isosport. It is modified and stabilized for sublimation/graphics transfer. It is Clear.
This is high quality and durable crosslinked base. Very close to sintered. More durable can not be produced by Isosport for wakeboards.
It is the toughest base Isosport can produce in this width. It is custom produced and therefore limited quantity.
The molecular structure is getting crosslinked in a separate process in order to achieve similar properties compared to sintered bases.
Base is sanded and flamed on both sides. Make sure you use outer side of the roll as epoxy side!
This 0.9mm base can fit with slim 0.9mm step edges.
Will be 60% clear when laminated, graphics visible from inside, see pictures below.
Graphics with Sublimation. If UV or Latex printing is only option, do tests with primer first.
Read more on sublimation here: https://www.junksupply.com/sublimation-heat-transfer-of-graphics-on-plastics/
Make sure you use outer side of the roll as epoxy side if both are sanded, or if one is sanded use that one!
Recomandations from Isosport on sublimation, but this can be experimented with to get best results.
Some manufacturers call this a ptex base.
Temp. | 130 °C |
Heating time | min.300 Sek. |
Cooling time | 300 Sek |
Some manufacturers call this ptex sintered base for ski and snowboard.